Notifications
Clear all

Circle

12 Posts
7 Users
0 Reactions
6,535 Views
Posts: 53
 JRF
Topic starter
(@jrf)
Trusted Member
Joined: 11 years ago
[#41212]

hi
What is the best way to make an RGB circle? My idea is: using an RGB 10/30 strip, 15' or so of 1" white pex. Slide the strip into the 1" pex pipe and join the ends with a pex fitting Tee. The tail of the strip comes out of the tee....Just not sure if this would for a nice circle....any other ideas?
thanks


11 Replies
Posts: 8
(@gclights)
Active Member
Joined: 11 years ago

Are you thinking of doing something like this?

I've been tossing around the idea and have found a few resources about design.

http://www.superstarlights.com/Other/CircleConstruction.php


Reply
Posts: 53
 JRF
Topic starter
(@jrf)
Trusted Member
Joined: 11 years ago

Thanks for the info, Im just looking to add a couple elements to my show for this Christmas, I have four 3' x 8' matrix panels which will cover the 4 windows, and a 16 strip megatree, so I thought I would add a couple circles (around 6' diameter ) , possibly mounted to my front porch columns...


Reply
Posts: 132
(@danozfw)
Estimable Member
Joined: 15 years ago

I made a prop with three circles using 1" PEX and joined the ends with Tees. I had to use hose clamps to keep the PEX attached to the Tee. You can see them in action on the right side of this video. Sorry I don't have pictures of the build.


Reply
Posts: 53
 JRF
Topic starter
(@jrf)
Trusted Member
Joined: 11 years ago

Yeah tha'ts great, its exactly what I am planning on using, the pex, tee's and hose clamps.


Reply
Page 1 / 3
Share: