Notifications
Clear all

Pixel Plane problem

41 Posts
6 Users
0 Reactions
13.2 K Views
Posts: 1763
Topic starter
(@santacarl)
Noble Member
Joined: 19 years ago

OK....that worked.....so far as getting the saved effect to a folder.....

WHen I went back and "Add external pixel plane effect" to the sequence.......I get the same screwed up preview......even though the effects I dropped onto the RGB channels worked perfectly......

angus40 wrote:Here is a screener of the page when you choose to make an external PP effect from rgb channels.

I had to select the nutcracker folder .


Reply
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago

suggestion to rid all aligators !

Start a new sequence add audio and . create a new pixelplane fresh from the pixel plane manager

assign all neccessary to get visuals

preview group and preview #s

create display group for the pp and open it

now test the effect

It is my belief that something in your construction of this pixel plane is missing in association ( somewhere in the gutts of HLS )

I have had a similar experience with using /assigning rgb channels that had other associations within hls .

this did not turn out well either and I believe i ended up ( shooting my computer in frustration <<<kidding) deleting the sequence and starting fresh .

Now it is routine to create a pixel plane from scratch for me if needing a new element etc .

Worth a shot <<< and not at the computer lol .


Reply
Posts: 1763
Topic starter
(@santacarl)
Noble Member
Joined: 19 years ago

Yep.....already tried that (multiple times actually).....same results....


Reply
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago

I would like to test your HLSNC file if you could share it .


Reply
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago

Ok here is the results of testing

both on rgb channels and on a pixel plane channels

I do not see any difference in preview during play back .

I can see the effects fully from start to finish .

the .hlsnc file size is 50.3 mb


Reply
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago

Start with a single effect in Nutcracker say a spiral or a butterfly effect etc.

export that and play it on your PP channel to verify all is happy .

Get the engine working before you load it down with box cars 🙂 lmao


Reply
Posts: 1763
Topic starter
(@santacarl)
Noble Member
Joined: 19 years ago

Did it with text first....10 seconds...single effect.....same results...
Repeated with butterfly....10 second.....single effect same results...
Changed model in NC to 180 and 360 degree versions...same results....

Is it possible that I have a corrupted file someplace inside of HLS? Would it help to uninstall and reinstall?

angus40 wrote:Start with a single effect in Nutcracker say a spiral or a butterfly effect etc.

export that and play it on your PP channel to verify all is happy .

Get the engine working before you load it down with box cars 🙂 lmao


Reply
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago

I suspect your preview Group#'s and Preview #'s are not associated correctly .

This effect should display perfectly .

https://drive.google.com/file/d/0B3-Di52NvkIhenpJczU1ajdvX2c/edit?usp=sharing

If you cannot see this effect your preview is not associated correctly or your channel configuration for your mega tree pixel plane is not correct .

this effect is for 64 strings of 42 pixels .


Reply
Posts: 1763
Topic starter
(@santacarl)
Noble Member
Joined: 19 years ago

Did you see the screen shot I sent? Is that what the effect should look like?


Reply
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago

Carl try this and there will be no doubt what the effect is .

https://drive.google.com/file/d/0B3-Di52NvkIhUV9lbFRtcFcwSjQ/edit?usp=sharing


Reply
Page 3 / 5
Share: