Donny M. Carter wrote:Can what I want to do be done?
Yes. Use the HLS toolbar. Place a selection box around the black RGB effect.
With the HLS toolbar up place your RGB effect over the blacked out portion. You can even do RGB color chases horizontally and vertically.
I've been doing this all week so I know it works.
I see now! Place the box around the black! Thanks!
Try this -- may not work.
Draw a BIG selection box around everything.
Right Click -- modify effect.
Select Color and then tell the dialog you ONLY want to modify color.
Joe
JHinkle wrote:Try this -- may not work.Draw a BIG selection box around everything.
Right Click -- modify effect.
Select Color and then tell the dialog you ONLY want to modify color.
Joe
Didn't work!
The easiest thing I found to do was make an RGB beat and go from there! Thanks for the help everyone!
This can be done. Here are the steps.
1. Place a selection box around the "blacked out" effects in your RGB channels that you want to change. This can be across the whole channel if you want.
2. After placing the selection box around them and you have locked the selection box down by left clicking again....right click.
3. This will bring up a menu and click on the very first line "Display HLS Toolbar"
4. Go to the long colored box next to "Change RGB Color Effects" and change it to what color you want the "blacked out" effects to be.
5. Now that you have chosen your color click on the "Change RGB Color Effects" button on the HLS toolbar and BOOM!
Hope this helps. Again you can use the Chase RGB Horizontal or Vertical and create some cool effects as well. Hope this helps.
Donny M. Carter wrote: Thanks for the help everyone!
Glad to be of assistance. 🙂
