
Ether-Node
Sent from my iPhone using Tapatalk

Schedule
Sent from my iPhone using Tapatalk
I just pulled up my old helix configs. Yours looks identical to mine. I never had an issue. I don't remember if the ethernode would flash or not. I haven't used in 3 years. .
Hi MLevings,
I've read many posts where you were involved. Glad to hear from you. Thanks for your efforts.
I heard from Greg by email. It's an exam week for him. I'm hoping to hear from him again soon, when he is done with his exam.
I just changed my configs this morning to what I posted and tested with it. Same deal. I didn't previously do the DMX universes correctly. I realized it after looking at Greg's Ether-Node posting, a few times...
I'm glad you confirm that I now have it correct. Whew.
So, I know something must not be right with the Ether-Node board.
I have to jumpstart it to get it working (multimeter on ohms going between R4-3.3V and the 3.3V lead at the SD Card slot). I found out how by accident. I was checking continuity across the board and one time I powered it up, I got Heartbeat.
So, once I get it going, I am able to ping the board's IP address. I even get activity at the SanDevice (E6804) pixel controller's universes, as if the Ether-Node is sending comm to the E6804. But, no LINK light on the Ether-Node for the socket. The Socket (1) Enabled light turns on, as it should. And not pixel lights lighting up. With the test pattern, if enabled on the E6804, does work. Lights do work.
Sent from my iPhone using Tapatalk

Showing packets received after running the triggered show.
Sent from my iPhone using Tapatalk
