pumpkin patch
 
Notifications
Clear all

pumpkin patch

15 Posts
9 Users
0 Reactions
9,947 Views
MartinMueller2003
Posts: 7613
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

Dumb RGB with a Renstick or
ESPixelstick as a controller playing a sequence from the the SD card with a daisy chain from pumpkin to pumpkin. I suspect you would need 20 or 30 pixels per pumpkin to get some decent light. You might look into Pixel rings or Pixel Modules (blocks of LEDs on a single mount). They might be easier to work with.


Reply
Posts: 1420
(@1pet2-9)
Noble Member
Joined: 6 years ago

Oooooh yes. Pixel rings. Now THAT would rock.

Edit:. argh I'm sorry, I'm not keeping up with the times. I meant that would be sick. That's dope.


Reply
Posts: 186
(@knightrohulk)
Estimable Member
Joined: 13 years ago
DrNeutron wrote:I know I am going to get "eaten alive" by this comment, but you could also use Dumb RGB for this particular project since all you are trying to accomplish is change color within a prop.
The one nice thing about dumb RGB modules is that all you need worry about is voltage drop.
This is the reason I still keep a couple 27 channel DMX controllers hanging around as they would work great for something like this.

I agree. I have done what the OP is wanting to do but used smart pixels just because I already had them. I have around 10 bullet pixels per pumpkin. There’s no real effects you can do with the smart pixels inside the pumpkin other than maybe flicker or twinkle. So, if you don’t already have smart pixels and a controller and are looking for a really cheap solution, consider dumb pixels.

I will try to get some pics of my setup this weekend and provide more details on what I did.

Sent from my iPhone using Tapatalk


Reply
Posts: 2214
(@ctmal)
Famed Member
Joined: 19 years ago

Or, if you just want a "static" flicker effect and you already have a Renard, you can run something like what I did for these candles. It uses a modified Renard code(the same as my RenTester) that literally just loops the out and the in of the Renard.
https://youtu.be/oT1QlnyFsjc

I did this at my Mom's house for a couple of years in pumpkins and with candles and it looks really good.


Reply
dirknerkle
Posts: 10309
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

I made some wireless pumpkins that would do the job, although they'd be a bit expensive -- each pumpkin has its own usb 5vdc rechargeable power bank, a D1-Mini (ESP wireless receiver) and a couple pixels, so about $15 per pumpkin.... But they would give you total control of each pumpkin and could run off your home wireless network... until visitors walked off with them because they'd be pretty cool...

https://vimeo.com/368099444


Reply
Page 2 / 3
Share: