Grinch / SSR Help
 
Notifications
Clear all

Grinch / SSR Help

10 Posts
5 Users
0 Reactions
3,967 Views
Posts: 18
 ulto
Topic starter
(@ulto)
Eminent Member
Joined: 18 years ago
[#5529]

Hey,
I am having some problems running all of my SSRs. I have 64 channels setup, but when I go to test them, I cannot turn one on at a time. This is also the same for my sequences. They will work if I have alot of them on, but not one at a time.

Can anyone help please?


9 Replies
Posts: 1079
(@bmcgeeny)
Noble Member
Joined: 18 years ago
ulto wrote:Hey,
I am having some problems running all of my SSRs. I have 64 channels setup, but when I go to test them, I cannot turn one on at a time. This is also the same for my sequences. They will work if I have alot of them on, but not one at a time.

Can anyone help please?

Sounds like you have something wrong in the setup. Need more information and I assume you have gone back and read the troubleshooting guides. There was just another post up here.

So be more specific. You say cannot turn one on but turn on a lot? what is a lot?

Do they appear to work properly in the sequence when "a lot" are on.


Reply
Posts: 18
 ulto
Topic starter
(@ulto)
Eminent Member
Joined: 18 years ago

Okay, if I want to turn on channel 1, it will not turn on, but if I turn on all 64 channels, they all come on.

During sequences, not all the channels come on when they are programmed to. I have a large 6 channel tree with 1200 Led lights. When it is programed to have 4 of the channels on, only 2 come on.


Reply
Posts: 1079
(@bmcgeeny)
Noble Member
Joined: 18 years ago
ulto wrote:Okay, if I want to turn on channel 1, it will not turn on, but if I turn on all 64 channels, they all come on.

During sequences, not all the channels come on when they are programmed to. I have a large 6 channel tree with 1200 Led lights. When it is programed to have 4 of the channels on, only 2 come on.

Have you checked all your grounds very carefully?


Reply
Posts: 18
 ulto
Topic starter
(@ulto)
Eminent Member
Joined: 18 years ago

Are you speaking of the grounds on the parrallel port to the grinch, if so yes.


Reply
dnesci
Posts: 563
(@dnesci)
Honorable Member
Joined: 19 years ago

I'm assuming you have Vixen set up correctly with the 595 plug in.

Your parallel port is set for extended.

How are you powing the Grinch and the SSRs? Are you using the computer power supply or another supply? If it is the computer how are you bringing the power to the Grinch, via the cat5 or two separate wires?

A little more back ground will help us to walk you through it.

Don


Reply
Posts: 18
 ulto
Topic starter
(@ulto)
Eminent Member
Joined: 18 years ago

I have a seperate power source, coming through the Cat 5 cable into the grinch. It is generating 4.85 volts and 2 Amps.


Reply
RavingLunatic
Posts: 1502
(@ravinglunatic)
Noble Member
Joined: 19 years ago

You say you are using LEDs, are you also using the more sensitive triacs (511-BTA04-700T)?

Try using some regular minis and see if you have better control.


Reply
Posts: 18
 ulto
Topic starter
(@ulto)
Eminent Member
Joined: 18 years ago

The 6 channel tree is the only part of my display with LEDs. I have the same problem with the rest of my display.


Reply
NogginBoink
Posts: 482
(@nogginboink)
Honorable Member
Joined: 19 years ago

First, ensure that you have the plugins set up correctly in Vixen.

Then, ensure that your computer and your external power supply have a common ground. (If they don't, connect the computer's ground to your external power supply's ground.)


Reply
Share: