cable lenth
 
Notifications
Clear all

cable lenth

11 Posts
9 Users
0 Reactions
8,054 Views
tweist
Posts: 394
(@tweist)
Reputable Member
Joined: 18 years ago

The first year we did our display, I used 5 Grinch boards and about 8000 feet of cat 5. The longest run was over 350 feet and we never had a problem. I kept the Grinch controllers inside the garage and connected all of the SSR's at each house. That way I did not have to pay everyones power bill. Worked great. I ended up cutting a hole in the wall of the garage to route all of the wires thru.
At 70 feet, you will have no problems at all.

Hope that helps.


Reply
DaveJZ
Posts: 974
(@davejz)
Noble Member
Joined: 16 years ago

I've been told with the Ren C you should be able to place the Ren C, and Grinch in your yard (the Ren C Makes it a Renard Board)... and run the SSR's from that point. I plan on having my RenC's and 595 Boards a good distance from my computer and run the SSR's off of them. That way I only have to run one length of long Cat5 and shorter ones off of it.


Reply
griffixdc
Posts: 2512
(@griffixdc)
Famed Member
Joined: 16 years ago

well i was going to say factor in your environment ...if its cold voltage drop seems to increase....although looking by the person who had one of the longest runs lived in a colder climate i think you will be as what everyone else said "golden"


Reply
dirknerkle
Posts: 10310
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

If it's less than 500 feet, I wouldn't worry about it. And if you're using RS485 from the PC to the Ren-C, I wouldn't worry if that distance was 500 feet either. If you're using RS232 from the PC to the Ren-C then you should probably try to keep that to 50 feet or less, although some folks (including myself) have been successful with RS232 and 100-feet length.


Reply
Wayne J
Posts: 7789
(@wayne-j)
Illustrious Member
Joined: 19 years ago

I think it was 1100 feet that one member used for testing, and had zero issues.


Reply
Page 2 / 3
Share: