Which Is Best?
 
Notifications
Clear all

Which Is Best?

29 Posts
13 Users
0 Reactions
15.7 K Views
wbottomley
Posts: 550
Topic starter
(@wbottomley)
Prominent Member
Joined: 18 years ago
[#25100]

I plan to run just over 29K channels this year with 28.8K in RGB. Which software would handle that load capacity the best? Vixen 3, HLS, LSP, etc.


28 Replies
jaywalk101
Posts: 761
(@jaywalk101)
Prominent Member
Joined: 15 years ago

good lawd that's a lot of channels! 🙂 I have the professional version of LSP and it lets your run over 32k channels, but I doubt I'll ever hit that count. Not even sure if LSP can even handle that many channels without performance issues though.... I've heard good things about HLS running very efficient with high channel counts. May want to take a look at that....


Reply
Lionking_Tx
Posts: 780
(@lionking-tx)
Prominent Member
Joined: 15 years ago

I would go with either V3 or HLS.
I can't say anything about LOR/LSP, however they charge per universes used, so I wouldn't recommend neither of those two

Personally I had around 12K channels run by HLS last year and not one Hicup....OK, tripped the breaker a couple of times in the beginning, but that wasn't the software's fault :munch:


Reply
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago

I think You had better look at your display carefully and decide as to what type of effefcts you want to acheive , then you can narrow the playing field as to which sequencer to go with .

your biggest obstacle ( depending on how detailed your sequences are ) will be loading the data for that high of a channel count .

If your discretely addressing each rgb channel throughout sequencing , the file sizes will balloon .

You may want to consider Light Factory as an option also .


Reply
jnealand
Posts: 956
(@jnealand)
Prominent Member
Joined: 19 years ago

Your show computer will need to be a very good one with lots of memory. I had to upgrade my show computer last year and I only had about 7000 channels.


Reply
Posts: 213
(@aaron1)
Estimable Member
Joined: 16 years ago

Jim,

What was the capability of the old machine and what software are you using? I'm doing about 12,000+ channels this year. Current machine is an early dual core Intel with 2GB of RAM. 220 channels of LOR ran fine last year. I was planning for the possibility of an upgrade (planned experiments in a few months to find out for sure). But if I need to start looking for a good buy on a new machine, I'd rather start sooner than later. Would also prefer some more time to ease the wife into the idea. 🙂


Reply
jnealand
Posts: 956
(@jnealand)
Prominent Member
Joined: 19 years ago

I run Vixen 2.1.4 My old show computer was an intel 3ghz system with 2gb ram and 250gb HD. That machine just bogged down when trying to run a show. If I had more that 3 sequences it did nothing but generate errors. I switched to a core i7 with 6gb ram and win7 x64 with 1 TB HD. Everything ran like a champ. Still using vixen 2.1.4 My sequencing machine is a corei7 with 12gb ram. More memory really helps. A dual processor system is a must in both, but 4 processors work well also.


Reply
wbottomley
Posts: 550
Topic starter
(@wbottomley)
Prominent Member
Joined: 18 years ago

Sounds like a new PC is in store though I hate Windows 8. Let me look for a used one.


Reply
Posts: 33
(@brian000)
Eminent Member
Joined: 14 years ago

Like you, I'm finding that S3 isn't handling the load even using subsequences.

Does anyone have a used laptop?


Reply
wbottomley
Posts: 550
Topic starter
(@wbottomley)
Prominent Member
Joined: 18 years ago

Here's my LOR S3 saga.

It appears that HLS, Vixen 3, or LSP will win.


Reply
Page 1 / 3
Share: