Due to some health issues, I have ran the same Christmas and Halloween shows for the last 5 years without any changes. I have not kept up with any smart pixel changes, but now I'm ready!
I've been running Vixen 2.5 for years now, using led strings and dumb pixels. I am ready to move into smart pixels, and am wanting to mount them on the house so I can do year round holiday lights. I've already purchased some WS2811 pixel strings and a power supply.
Now I am trying to figure out what controller to use. I have been looking at the forum for a couple weeks, and it's a bit overwhelming. Total feet on the eve and soffit area is around 90 feet or so. Of course, I would probably like a controller that can be expanded in the future.
Also, I don't think Vixen 2.5 is going to be able to fill the smart pixel needs. I am very comfortable with Renards, and have built all my controllers; both AC and DC. Moving to a different software platform, I would want to be able to import my current setup, and use all the Renard boards and channels I currently do (except the house eve/soffit, of course). What software program is suggested for my needs? I love YouTube learning, so it would be helpful to have a software that has plenty of that learning.
Some ideas...
1. When it comes to pixels, "permanent" is only "temporary" at best.
2. Be sure the mount the pixels where you'll have easy access to them, because there WILL BE repairs.
3. I have "some" pixels too, and I still use Vixen 2.1. Usually around 1200 channels. But yeah, pixels and the old Vixen (even 2.5) are inconvenient.
Good luck with your project.
Try Vixen 3 and xLights. Forget about the little boxes, you no longer think in those terms. Set the start and end of an effect and vixen 3 will align to a hidden block for you.
