software for static...
 
Notifications
Clear all

software for static control over individual pixels

14 Posts
7 Users
0 Reactions
14.3 K Views
Posts: 14
Topic starter
(@jasonlynn)
Eminent Member
Joined: 6 years ago

thank you Angus, I just got a second pixel stick in the mail so I'll try and figure out how to load this code next week and see if I can get something happening.


Reply
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago

Hi jasonlynn

That is great you verified the ucs1903 pixels work with WLED . More good news is WLED supports e1.31 so you would be able to simply load Artnet/Artnet lite App on your phone which has features that enable you to turn on/off each pixel independently to any color you like . 🙂


Reply
Posts: 20
(@calcprogrammer1)
Eminent Member
Joined: 10 years ago

My OpenRGB software can do what you want. It's mainly designed for RGB computer hardware (keyboards, mice, parts, etc) but it can output E1.31 to control other devices like pixel controllers and smart bulbs. The latest release 0.4 adds a graphical view of the LEDs where you can click on one or more LEDs and apply a color. You can save profiles as well. It also has an SDK where you can control it from other software and is capable of receiving E1.31 via an SDK app I wrote for it. This allows it to act as an E1.31 router of sorts where you can send E1.31 from your sequencer into OpenRGB and then out to devices. This allows you to monitor the current colors in the OpenRGB UI as well as controll non-E1.31 devices with E1.31 software. It supports both Windows and Linux.

https://gitlab.com/CalcProgrammer1/OpenRGB

https://gitlab.com/CalcProgrammer1/OpenRGBE131Receiver

You can see how to set up E1.31 outputs here:

https://gitlab.com/CalcProgrammer1/OpenRGB/-/wikis/E1.31


Reply
Posts: 3
(@henry)
New Member
Joined: 6 years ago
jasonlynn wrote: ... Wled is loaded and works great ... i want to have a symetrical light pattern. Not just a 2 on 2 off pattern. 2 in peak and 2 on each side. So if I could just pick particular lights as I'm looking at it with my tablet, that would be ideal.

If I understand correctly, you have 50 LEDs on one side, 50 LEDs on the other, and you want them to stay mirrored.

Presuming you are loading WLED UI in normal (not PC) mode:
1. From default page, select "Segments" tab on bottom of UI
2. Expand "Segment 0" in the UI
3. If you've already configured it for 100 LEDs, the values should already be mostly correct, but ...
4. Set "START LED" to zero, "STOP LED" to 100
5. Set "GROUPING" to one, "SPACING" to zero
6. Enable the checkbox for "Mirror effect" ... this will give you the symmetry you desire
7. Now, at the bottom of the UI, select the "Effects" tab
8. Choose any effect, and watch it automatically get mirror'd across your LEDs!

Enjoy!

WLED also has a decent REST API, and very exhaustive JSON API, if you want more granular control.

And as others have mentioned, you can always switch to using E.131, if the above isn't enough.


Reply
Page 3 / 3
Share: