I'm looking to collect a bit of data related to how the various sequencers deal with updates on the sACN (e1.31) network. Given that I don't have or know how to use all it the various options out there I'm soliciting help.
I'm looking for data samples from as many sources as possible, LSP, LOR, HLS, Vixen 2.1, 2.5, Madrix, xlights, light jams. I'm also interested in seeing output from real commercial hardware based senders like pro lighting consoles.
Here's what I need.
You'll need the sequencer of your choice and a copy of wireshark (freeware)
Set up 1 full universe of output. (510 is ok)
Create a simple sequence. No music necessary. Use the fastest refresh rate available. Set channels 100-110 to full on for 10 seconds then set channels 200-210 full on for 5 seconds.
Then do 3 sec ramp down on those channels
Leave 10 sec of dark (all channels zero) at the end.
Set up wireshark with a filter that only captures sACN data. Start the capture and then play the test sequence. If you're recording a hardware based device you may need to set up sacnview to receive the universe so that your computer actually subscribes to the stream.
What I'm looking for is to see how the various programs handle data refresh and bandwidth conservation. I'm actually more interested in the popular commercial programs than I am the free stuff but both data sets will help.
In return I will publish a report on the results for the benefit of anyone who is creating software or interpreting its data.
Thanks.
--Jon Chuchla--
Sent from my iPhone using Tapatalk
