I have this relay https://www.amazon.com/SainSmart-8-Channel-Duemilanove-MEGA2560-MEGA1280/dp/B006J4G45G for light show pi. I have used them before with the same power supply and they worked I tested light show pi with the 120 volts a couple days ago and all and it worked. Now they don’t. Does anybody have any power supplies they recommend? By the way I have no idea what is wrong. I have left it outside in the cold before and same with the pi. Thanks for any help!
What I'm confused about is "power supply". For lightShowPi, your relay board power connects to the 5V pin on the pi. No power supply involved--only the wall outlet and the wall wart powering the Pi (which I guess is a power supply).
I would test the relays directly from the Unix shell, using the Pi's gpio commands. Probe the gpio voltages with a voltmeter. Also, two things can go wrong: 1) the SSR's are really meant to switch on 5V. We just hack it to work on 3, and it just works. Usually. Their absolute bare minimum to switch on is 2.5V, and if you get any voltage drop at all, it won't work. So if gpio doesn't work, you can try touching the relay's input lead with 5V by hand, and see if that changes anything (but disconnect that lead from the gpio pin first, as a precaution). Second, those relays have a low 2A limit on the 120VAC current they can carry, and if you exceed that, they will just silently quit working one day, and not always right away. It's why a lot of us in lightShowPi built fuses into our rigs. If some relays work and others don't, then that's probably the problem.
I have tested them a week ago with the lights plugged in and it worked. I used a separate power supply in case of under voltage, it looks like the lights dimly light up but not full power. I have been experimenting with 3 different power supply’s and a different relay. None of them work, it is a bit cold where we live but I have used a arduino last year with the same relays and power supply. So the cold shouldn’t be effecting it if that, make it better. Have no idea what has happened since last week. I will update when I have time to experiment more.
UPDATE: I fixed the problem, it looks like the main power bar got disconnected over the last year. Lesson learned check everything before putting it outside in the cold
Are you that guy in the LSP forum who lived in one of the Prairie provinces?
