E682 software updat...
 
Notifications
Clear all

E682 software update?

5 Posts
4 Users
0 Reactions
2,859 Views
Posts: 1
Topic starter
(@jborz31)
New Member
Joined: 6 years ago
[#54963]

Wondering if anyone can help me update my E682 controller? I use this for my megatree and it worked correctly last year. This year I hooked everything up and the user interface is missing information, which I think is messing up my lights. If I have a picture of frosty it looks like Picasso painted it, or if each strand is supposed to be one color in the sequence, one color might start in a different strand. For some reason I’m having a hard time wrapping my head around how to update the firmware, so I’d like to know is there any easy way to reboot with out updating anything. Also, I have it hooked up to a pi, so I’m hoping something can be done wirelessly. Attached is a picture of what I see when I type in the ip. Thank you and have a happy thanksgiving!

07E42AF3 721D 429B B7C5 46DDF2DC102C

4 Replies
jchuchla
Posts: 8698
(@jchuchla)
Illustrious Member
Joined: 15 years ago

I’m pretty sure you need a “prop plug” to update from that version. This is a serial based flashing adapter you connect directly to the board and to a PC and use the propellor software to flash the board.

Sent from my iPhone using Tapatalk


Reply
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago

Upgrade Procedure if you do not have a Parallax Prop Plug Programmer:
Please email jim@sandevices.com for update instructions. This will insure that you have the most recent
documentation.


Reply
Posts: 8517
(@angus40)
Illustrious Member
Joined: 15 years ago
MikeKrebs wrote:do you really need to update the firmware or just define the data correctly?

His output config page clearly shows he needs to either re-flash the same firmware or upgrade it .

That page in his photo is near MicroSoft quality . lmao


Reply
Keebler
Posts: 1691
(@keebler)
Noble Member
Joined: 17 years ago

HERE ya go. here is the firmware update and the docs for it


Reply
Share: