New Open-Source Con...
 
Notifications
Clear all

New Open-Source Controller for programmers

32 Posts
12 Users
0 Reactions
15.2 K Views
Posts: 51
Topic starter
(@hakanl)
Trusted Member
Joined: 14 years ago
David_AVD wrote:Sounds interesting. Can you give an example on how someone would use those files to achieve an end result?

Currently I only have 3 outputs: Simulator (Windows Form), Enttec USB Pro/DMXKing and my home-brew Propeller-based IO-Expander. So you'd need one of those to get an end result. Also planning to add sACN E1.31 output, my E682 controller should show up this week.


Reply
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago

So - I assume from the video that the foot pads are the triggers for the effects/props then. That's pretty neat - we don't really have a true cause/effect type of software response here other than having external triggers in Vixen that can kick of sequences (not the same thing). I'll be sure to take a look at this as I plan to put more effort into Halloween this year.

btw - - where are you located? Looks like CA to me - you may want to put your location in your profile (at least the state).


Reply
Posts: 51
Topic starter
(@hakanl)
Trusted Member
Joined: 14 years ago

Yep, I built a DIY pressure mat (read more here: http://haukcode.wordpress.com/2012/10/29/diy-pressure-mat/ ) that's hooked up to a digital input on my Propeller board. It then sends a serial command to my Animatroller sequence that triggers the sequence. The source code for the Propeller board is in GitHub as well, and it's just the standard Propeller Proto board with a pull-up/down resistor on the input. There's some more info on my blog about the Halloween display: http://haukcode.wordpress.com .

That's exactly the reason why I started the Animatroller, I wanted something that could be interactively triggered, almost like a PLC. But since I've been coding C# for years I figured I could build a nice high-level framework so I can have very lean, easy to read/write code for the actual sequence.

Yep, San Diego, CA is my location. I've updated my profile, didn't see that before.


Reply
budude
Posts: 10400
(@budude)
Illustrious Member
Joined: 18 years ago
HakanL wrote:Yep, I built a DIY pressure mat (read more here: http://haukcode.wordpress.com/2012/10/29/diy-pressure-mat/ ) that's hooked up to a digital input on my Propeller board. It then sends a serial command to my Animatroller sequence that triggers the sequence. The source code for the Propeller board is in GitHub as well, and it's just the standard Propeller Proto board with a pull-up/down resistor on the input. There's some more info on my blog about the Halloween display: http://haukcode.wordpress.com .

That's exactly the reason why I started the Animatroller, I wanted something that could be interactively triggered, almost like a PLC. But since I've been coding C# for years I figured I could build a nice high-level framework so I can have very lean, easy to read/write code for the actual sequence.

Yep, San Diego, CA is my location. I've updated my profile, didn't see that before.

Awesome - I have a couple different Propeller boards i can use for this that have been collecting dust.


Reply
ebrady
Posts: 670
(@ebrady)
Prominent Member
Joined: 17 years ago

Interesting stuff...


Reply
Page 2 / 7
Share: