I'll try my best to explain. If I select a blue/white color with left to right effect for my roofline and red/green for my walls. When I run xlights for a preview, for some reason I get blue/white and red/green in my roofline from the walls. I do have a group called full with my walls and rooflines and other porps. I can't find any over lapping. I do hit update and render after but issue still remains. Any help would be great.
Check to make sure string properties have the correct color order for the string that’s acting up. You should be able to select RGB, BRG etc.
if they are the same pixels make sure both are on the same setting. Else just use trial and error till you get the right colors you’re expecting.
Sent from my iPhone using Tapatalk
Sorry it's hard to explain and not able to send picture currently. The color works find but color from a different model gets added. Should only be blue/white but ends up being blue/white/red and green.
agreed, check your layers you might have one hidden causing the issue.

