Best software to pr...
 
Notifications
Clear all

Best software to program RGB lights

10 Posts
6 Users
0 Reactions
13 K Views
Posts: 4
Topic starter
(@jaybird)
Active Member
Joined: 9 years ago
[#46644]

I currently use LOR with a 16 channel controller and it seemed easy enough to set up my first small show for Halloween. I am looking to go into RGB for Christmas and make a pixel tree. what software is the easiest to program in??? I am looking at buying a Pixie 16 controller from LOR, but maybe going elsewhere to buy the LED strips. Just want to know if it is better to program in a different software.


9 Replies
Posts: 1159
(@deonb)
Noble Member
Joined: 13 years ago

Vixen 3.0 is the easiest to start.

But if you just want to purchase someone else's sequences - XLights.

Also, if you think your show is going to grow to tens of thousands of pixels, start off with XLights. Higher learning curve, but better performing than Vixen.

If you've never used any Windows application before, then HLS is also an option.

Finally, don't actually drive your show from either of those. Export it and drive it from a Raspberry Pi or Beaglebone Black running FPP (Falcon Pi Player).


Reply
Posts: 423
(@keithsw1111)
Reputable Member
Joined: 11 years ago

I would mostly agree with deonb although the Pi for playing your show is really optional. If you have a pc to dedicate to running your show then adding the complexity of a Pi isn't necessary.


Reply
Posts: 357
Guest
(@jerry72)
Member
Joined: 13 years ago

I prefer Super Star over Xlights or Vixen, but that is just me.


Reply
Posts: 4
Topic starter
(@jaybird)
Active Member
Joined: 9 years ago

I have used LOR this year, seems pretty easy, but controllers are so expensive. I am hoping to try my hand at some RGB stuff this fall. I will have to look at XLights. I have never used the Raspberry Pi or Falcon Pi player. How easy is it to use? Where is the best place to buy LED strips from?


Reply
Posts: 4
Topic starter
(@jaybird)
Active Member
Joined: 9 years ago

What hardware controller do you all use?


Reply
Posts: 149
(@bob81354)
Estimable Member
Joined: 15 years ago

E682 is a good board to start with
https://www.sandevices.com/
or if it's just for a mega tree maybe something like this
https://www.amazon.com/ESPixelStick-Wireless-DMX-Pixel-Controller/dp/B072XT1V77
http://forkineye.com/espixelstick/


Reply
MartinMueller2003
Posts: 7615
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

+1 for the PI. Having the PC up and dedicated to the show was too expensive for me. a $35 PI that can run 50,000 or more channels was more cost effective.


Reply
Posts: 423
(@keithsw1111)
Reputable Member
Joined: 11 years ago

You won't regret getting a falcon controller. They are both the most powerful and can be configured from XLights which solves one of the messier problems in this hobby ... getting your sequence/player and controller configured correctly.


Reply
Posts: 357
Guest
(@jerry72)
Member
Joined: 13 years ago

You can sequence with lor and still use non lor controllers.


Reply
Share: