Im knew to this and have always had a decent christmas light display but this is the first year ive wanted to make my lights dance to music and need software for a mac or PC. Mac preferable. Thoughts.... Help me ..
Josh Johnson:biggrin:
doodle28 wrote:Im knew to this and have always had a decent christmas light display but this is the first year ive wanted to make my lights dance to music and need software for a mac or PC. Mac preferable. Thoughts.... Help me ..
Vixen is the software you are looking for and it can be downloaded from here: http://www.vixenlights.com/
Here is the only drawback, it will only run on a windows platform. I run mine on a mac using Fusion wmware and then start my Windows XP. I have never had a problem with it. All of the comm ports work just fine and I have never had it lock up.
Hope that helps. Oh and you can get Fusion online or at the apple store.
Good luck and let me know if you have any questions.
There is not software that I know of that will let you sequence on Mac, but you can look into a software called xLights that will let you run your show on a Mac, even if you don't have a sequencing software installed on it. You can find more information about it here or on www.diylightanimation.com. You can even run the software on Linux OS too.
tweist wrote: I run mine on a mac using Fusion wmware and then start my Windows XP. All of the comm ports work just fine and I have never had it lock up.
My brother is a mac only user. I built him a Ren24SS and told him he needed to find a PC with Windows XP, but this makes it sound like I gave him bad advice.
My question is, how did you get COM ports on a mac? USB to RS-232?<-- if so, what adapters and drivers are you using on your mac?
bcadman wrote:My brother is a mac only user. I built him a Ren24SS and told him he needed to find a PC with Windows XP, but this makes it sound like I gave him bad advice.
My question is, how did you get COM ports on a mac? USB to RS-232?<-- if so, what adapters and drivers are you using on your mac?
Within the Fusion software, there is a toolbar that is available. Once it is turned on, (very easy), all of the normal USB ports, CD drives, HDD's, etc, will show up at the bottom of the screen.
I use two of the USB ports, one is connected via USB to RS232 adapter connector, and the other is connected USB to XBee Explorer board. The Explorer board gives me the wireless that I need. As for additional software, it did not ask for any. I just plugged it in and the Windows OS did the rest.
Remember, once you start the Fusion software and it brings up the Windows OS, you are now in the windows world, not the Mac. The Windows OS sees all of the ports just as it would if it was a real PC.
Hope that helps.
