Here's my first Ren-w problem.
I have my XBee's. I also have the explorer board. I followed the instructions in the wiki. BUT, it says to set the MAC mode. That does not show up on my panel???
Do I have the wrong xbees??
Here's what I have. XBee Pro Series 2. XBP24-B.
What to do? Ignore it?
The series 2 is the Digi-Mesh version and is not compatible with the OEM Xbee. It has a completely different set of firmware and, actually, internal parts so it can't be reflashed with the OEM firmware either. I bought 3 or 4 of them last year and tried everything I could to make them work, then contacted tech support and was told the above info, so I returned them to Mouser for full credit. Just use the explorer board to reset them to default and get an RMA from Mouser that it was the "wrong part." Dang!!!
Thanks Dave. I bought them from Sparkfun so I'll contact them.
Geeze!!
I would like to have the right XBee with an sma antenna connector. Can you steer me in the right direction? I am intimidated by the number of choices.
bobkeyes wrote:I would like to have the right XBee with an sma antenna connector. Can you steer me in the right direction? I am intimidated by the number of choices.
Glad to. Here's the info from the Wiki - RenW antenna page
Antenna Questions/Answers
What are the part numbers for the various XBee antenna types?
Mouser's part numbers for XBee Pro modules currently are:
888-XBP24-AWI-001 --- 1" whip antenna
888-XBP24-ACI-001 --- on-chip antenna
888-XBP24-AUI-001 --- U.FL. antenna connector
888-XBP24-ASI-001 --- RPSMA antenna connector
Mouser's part numbers for regular XBee modules currently are:
888-XB24-AWI-001 --- 1" whip antenna
888-XB24-ACI-001 --- on-chip antenna
888-XB24-AUI-001 --- U.FL. antenna connector
888-XB24-ASI-001 --- RPSMA antenna connector
Sorry. I just didn't look in the right place. DUH!
New XBees on the way. Hope to have them Monday.

