Notifications
Clear all

ss24

14 Posts
8 Users
0 Reactions
4,495 Views
Posts: 127
Topic starter
(@baboiler)
Estimable Member
Joined: 15 years ago
[#21097]

I imported the BOM from the Wiki to Mouser for the ss24 build. As I am looking at the generated list on Mouser I am not seeing the PIC's. I looked at the glossary and see that is really a generic term given to the micro controllers. I can't see anything on the list that looks like a micro controller. Do I have to order them seperately? Would have liked to order the kit from WLC but they are out of stock on transmitters. Now I gotta make sure I am getting everything I need. If I miss something does radio shack or someplace like that carry most of this stuff or am I pretty tied to online ordering?


13 Replies
Wayne J
Posts: 7789
(@wayne-j)
Illustrious Member
Joined: 20 years ago

If you used the SS24 Wiki importable BOM, it has the exact part number, not a generic number.

Mouser part # 579-PIC16F688-I/P

🙂


Reply
OregonLights
Posts: 736
(@oregonlights)
Prominent Member
Joined: 16 years ago

In the BOM on the Wiki, the PIC is listed as P/N 579-PIC16F688-I/P. It's a little 14 pin IC.

EDIT: Wow, Wayne is FAST! :freak:


Reply
boyelroy11
Posts: 757
(@boyelroy11)
Prominent Member
Joined: 17 years ago

579-PIC16F688-I/P Should be the part number for the PICs.

HTH
Bruce


Reply
boyelroy11
Posts: 757
(@boyelroy11)
Prominent Member
Joined: 17 years ago

Dang, need to type faster, lol.


Reply
dirknerkle
Posts: 10310
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

The PIC that you need is the 16F688-I/P unit. The SS24 uses 3 of them. Buy 4 so that you can make a diagnostic PIC as well as the operational pics.

SHAZZZZBATTT!!! Am I late to the party or what?!?!?! :omg:


Reply
Posts: 127
Topic starter
(@baboiler)
Estimable Member
Joined: 15 years ago

Man - you boys are on it. I appreciate the help. Trying to figure this out on my own but most of this nomenclature is completely foreign to me.There will be more simple questions to come - I am sure of it!!


Reply
Posts: 127
Topic starter
(@baboiler)
Estimable Member
Joined: 15 years ago

My mistake. I thought there was a PIC for each channel. I now see there are only 3. It was there all along. Only a couple items unavailable from Mouser and I think I have replacement chose for them. Saved the project on Mouser. Going to wait another day or so and see if WLC can do anything on the kit. If not I'll get stuff from Mouser and hopefully Wayne J ordered.

I have been moving the ball a little on sequencing. Starting to get a bit of a feel for Vixen now. Still think I can have something done by Thanksgiving.


Reply
Posts: 127
Topic starter
(@baboiler)
Estimable Member
Joined: 15 years ago

Alright - this will change direction of this thread a bit but I don't want to start a new one. I got the 24HC kit ordered today from WLC. I pulled up the instructions from the wiki and am looking thru it. I have noticed in the written instructions it's mentioned often to pay careful attention to orientation of components during assembly. But the written instructions don't really describe the orientation and the picture isn't a really good one for reference. I am wondering if there are indicators on the PCB itself that point toward orientation?


Reply
dirknerkle
Posts: 10310
(@dirknerkle)
Illustrious Member
Joined: 18 years ago
baboiler wrote:Alright - this will change direction of this thread a bit but I don't want to start a new one. I got the 24HC kit ordered today from WLC. I pulled up the instructions from the wiki and am looking thru it. I have noticed in the written instructions it's mentioned often to pay careful attention to orientation of components during assembly. But the written instructions don't really describe the orientation and the picture isn't a really good one for reference. I am wondering if there are indicators on the PCB itself that point toward orientation?

Yes.


Reply
Page 1 / 2
Share: