i have all my stuff hooked up i also a have the cat 5 cable to the usb. put when i try to do my show. it doesn't do anything. i am using Vixen 3.7. Renard SS. running on windows 10. yes it is wired correctly. hope someone can help.
Can't help with vixen 3.7 configuration, but on the SS controller, the input jack is J2. If you have a programmer, you can use the Diagnostic Firmware to make sure the SS is functioning.
Wayne J wrote:Can't help with vixen 3.7 configuration, but on the SS controller, the input jack is J2. If you have a programmer, you can use the Diagnostic Firmware to make sure the SS is functioning.
I don’t have anything to make sure everything is working correctly. What Do you recommend?
Jsw2488 wrote:I don’t have anything to make sure everything is working correctly. What Do you recommend?
Did you build your controllers or buy your controllers prebuilt? Your first controller needs to be setup with a USB to serial connections, then after that cat5 (according to the WIKI), this setup has worked for me. Make sure your computer protocols have been setup according to the WIKI (a lot of useful info in there.)
Follow this link to the WIKI http://www.doityourselfchristmas.com/wiki/index.php?title=Renard_Main_Page once there pick which controller you have then go to the bottom of the page to "Related Links" and select troubleshooting Guide. This a manual way to check your boards out (also the long way) it also has a link in the guide for the Diagnostic Firmware and how to use it.
BillW wrote:Did you build your controllers or buy your controllers prebuilt? Your first controller needs to be setup with a USB to serial connections, then after that cat5 (according to the WIKI), this setup has worked for me. Make sure your computer protocols have been setup according to the WIKI (a lot of useful info in there.)Follow this link to the WIKI http://www.doityourselfchristmas.com/wiki/index.php?title=Renard_Main_Page once there pick which controller you have then go to the bottom of the page to "Related Links" and select troubleshooting Guide. This a manual way to check your boards out (also the long way) it also has a link in the guide for the Diagnostic Firmware and how to use it.
I bought it from someone I know. It worked last year. We tested it before I took it and it worked on his computer . He said it’s prob the plug that goes into the computer from the cat 5 cable.
