Renard Hookup
 
Notifications
Clear all

Renard Hookup

6 Posts
5 Users
0 Reactions
2,178 Views
kychristmas
Posts: 3955
Topic starter
(@kychristmas)
Famed Member
Joined: 18 years ago
[#9246]

Running crazy trying to finish everything up. Looking like 190 Channels in place by Sunday with one or two songs.

Anyway, I'm trying to decide how the best way to hook everything up and I'm not certain about the order of the boards and powering them.

I have:
4 Ren 16s
4 Ren 24s (Franks 3.3)
1 Ren 64 with 16 SSRs

I'm using a 4 port RS-485 Card.

I have a few questions:
1. Can the Ren 24's power the Ren 16's downline?
2. If I just run the Ren 16s in series on the same port, can I hook power directly to the first board and then have it pass it down the line?
3. If I need to supply power to each Ren 16, what are the power requirements.

Thanks,


5 Replies
Posts: 196
(@michael)
Reputable Member
Joined: 19 years ago
Reply
RichF
Posts: 1356
(@richf)
Noble Member
Joined: 19 years ago

Are your Ren16's the Xmus version or the SS version?


Reply
rstehle
Posts: 4348
(@rstehle)
Illustrious Member
Joined: 19 years ago
kjburns31 wrote:I have:
4 Ren 16s
4 Ren 24s (Franks 3.3)
1 Ren 64 with 16 SSRs

I'm using a 4 port RS-485 Card.

I have a few questions:
1. Can the Ren 24's power the Ren 16's downline?
2. If I just run the Ren 16s in series on the same port, can I hook power directly to the first board and then have it pass it down the line?
3. If I need to supply power to each Ren 16, what are the power requirements.

Thanks,

I will try to answer your questions:

1. Not easily without some modification, suggest you use a dedicated power supply (like a PC PS)
2. Yes, no problem.
3. Not sure, but I ran about 8 of them in series last year with no problems off of a PC PS using a couple hundred feet of Cat 5.

IMO, you could actually run your entire show off of one com port if you wanted to.......... But, I would probably use 2, one for the Ren 16's, and one for the rest.


Reply
kychristmas
Posts: 3955
Topic starter
(@kychristmas)
Famed Member
Joined: 18 years ago
rstehle wrote:I will try to answer your questions:

1. Not easily without some modification, suggest you use a dedicated power supply (like a PC PS)
2. Yes, no problem.
3. Not sure, but I ran about 8 of them in series last year with no problems off of a PC PS using a couple hundred feet of Cat 5.

IMO, you could actually run your entire show off of one com port if you wanted to.......... But, I would probably use 2, one for the Ren 16's, and one for the rest.

Thanks for the replies.

These are Ren-16 Xmus version. Or at least the Non SS. I bought them before Wayne and the guys introduced the SS stuff.

I'm going the Ren 16s on a separate port. I would like to have the Power supply in the enclosure with the first Ren16. I have a narrow,specialized PC power supply, but I'm not sure its enought to power all 4. What are the power requirements of a Ren16?

Can I hurt anything by trying it inside the house. I'm assumming that the last one will either work or not, I won't blow anything up, right?

Thanks,
Kelly


Reply
Page 1 / 2
Share: