Notifications
Clear all
Dec 01, 2011 9:38 pm
Anything downstream from this Ren48LSD is not functioning as it supposed to be.
If I unplug this Ren48LSD (power) and plug it back in, then Everythings downstream work fine for a couple of minutes then all stop again.
So that means something wrong with the Ren48LSD output?
1 Reply
Dec 01, 2011 10:06 pm
It's possible... The Ren48LSD has the exact same IN/OUT circuit as the RenSS boards. You can try swapping the two RS485 (8-pin chips) around to see if that helps. You may have to give it the onceover and reflow the pins on both to see if that helps things.
