So I know that in the vixen program you are able to set up a preview, and you can use the wiki to test and make sure all your boards and channels are working (which I am doing now). But just curious what everyone does to test everything before you set it up in your yard? Thinking of like a diorama or something to send the code to the boards and outputting to lights before setting all the strings up in the yard. I know in the past I was contemplating just setting up a bunch of the plug in night lights as well, but just curious how everyone else does this, if you even do.
I only have simple light strings in my relatively simple display.
I run two display setups for testing. One that simply pulses each channel 1 sec. in sequence across all controllers for initial connectivity. No filters or curves just simple raw output.
The second uses my actual display setup and pulses color groups make sure red is red for all elements for example. Then element groups, then chases to make sure left elements are on the left, and right to left is indeed right to left etc.
I do bench testing with balls of lights, but I am all AC lighting so this is simple, then when the time gets close I start to bring the props in from the shed to the garage and test them, tonight two of the talking light bulbs got brought in and hooked to their controller for testing. I also start to daisy chain my renards together to make sure they are all playing nice together.
Dave

