problem with FPP se...
 
Notifications
Clear all

problem with FPP set up

1 Posts
1 Users
0 Reactions
1,133 Views
Posts: 23
Topic starter
(@drounds67)
Eminent Member
Joined: 5 years ago
[#55499]

Hi,

I'm using a beaglebone black and was intially able to to connect to the device and use the falcon software after the initial install. I then flashed the software to the emmc so the beaglebone will run FPP without a card installed. That went thru it's process I then removed power, removed the card and rebooted the device. Now I can't see the device on my network like I could before and can't not login the the device using wither http://FPP or what was the device IP location assigned by my router before. I have tried installed an earlier version and reflashing the beaglebone but I still can't see the device and obliviously can't log in. My network is on an Orbi router system so I can easily see when devices are attached.

Any ideas on what to do? I do not have any access control on that would be blocking a connection. The greenlight is on for the ethernet connection on the beaglebone so the problem doesn't lie there.

Thanks for any help.

David


Share: