Notifications
Clear all
Mar 06, 2020 4:11 pm
When using a raspberry pi as my player, running FPP, I can just connect a 4 pin OLED (128X64 I2C SSD1306) to pins 1,3,5 and 6 on the pi, then enable the OLED in the FPP settings and it will work, correct?
10 Replies
Mar 06, 2020 4:51 pm
Also, would I need to do anything special to connect an RTC to the same I2C bus as the OLED?
Mar 06, 2020 5:08 pm
Yes the I2C buss allows multiple devices at the same time.
Mar 06, 2020 7:33 pm
Yes... You can connect them both.
That said, I DO sell a hat specifically for this purpose and an RTC is an option: https://kulplights.com/product/pi-oled/
Mar 06, 2020 9:30 pm
dkulp wrote:Yes... You can connect them both.That said, I DO sell a hat specifically for this purpose and an RTC is an option: https://kulplights.com/product/pi-oled/
Thanks. I'll look into your hat, but I'll probably just rig something up myself for now.
Page 1 / 3
Next
