Help with the setup...
 
Notifications
Clear all

Help with the setup page

4 Posts
2 Users
0 Reactions
5,361 Views
Posts: 230
Topic starter
(@oldandslow)
Reputable Member
Joined: 16 years ago
[#50929]

I can't get the FPP page to come up F16V3.
The IP address on the board is 192.168.001.050 and when I put this in for my http I do not get the setup page.
I have everything set in Xlights and when I hit FPP connect I get my play list.
I want to get the setup FPP setup page and put my xlight IP address in. I have the cat 5 cable plugged into the back of my computer.
How do I go about this.
I am running the new xlights version 2019-6 something.
Thanks
John


3 Replies
TazChaLet
Posts: 3042
(@tazchalet)
Famed Member
Joined: 13 years ago

what is your computers ip address I had to use the buttons on my falcon 2 so they were able too connect could be your stuff is 192.168.000.??? and you are trying to get to a ip of 192.168.001.??? this was my problem once I changed the board I was able to connect with computer


Reply
Posts: 230
Topic starter
(@oldandslow)
Reputable Member
Joined: 16 years ago
TazChaLet wrote:what is your computers ip address I had to use the buttons on my falcon 2 so they were able too connect could be your stuff is 192.168.000.??? and you are trying to get to a ip of 192.168.001.??? this was my problem once I changed the board I was able to connect with computer

I finally changed the controller to my Xlights IP and I'm on the controller. It uploaded the universes with the correct channel count but not the description. The port count are red and they are not Right either.


Reply
Posts: 230
Topic starter
(@oldandslow)
Reputable Member
Joined: 16 years ago

I finally changed the controller to my Xlights IP and I'm on the controller. It uploaded the universes with the correct channel count but not the description. The port count are red and they are not Right either.[/QU
Please see the attached to see how to fix the string port correctly.

Falcon 1
Falcon 2
Falcon 3

Reply
Share: