I am having an occasional issue with a prop staying on at the end of my show. I am using FPP Master Remote controllers. I understand there is an FPP Script to turn off all props at the end of a show. Can someone give me some guidance? I have never used an FPP Script.
Thanks in advance,
Running a script is as easy as, download the script and add it to your schedule (you might have to edit the script, depending). I'm not familiar with a script to turn off the lights, but I haven't looked either. Before you use a script, there are 2 settings you can try first. Under FPP Settings, Playback, "Blank between sequences". If that doesn't work, try... FPP Settings, Input/Output, "Always transmit channel data".
That might just fix your problem the easy way.
I had the "Blank between sequences" checked. I set the "Always transmit channel data" and I just added an "ALL OFF" sequence to the "Lead Out" section of my playlist. Hopefully, that will solve my issue.
I've had this same issue come and go over the years. This year's version of FPP seems to leave things on more often than last year's did. I use the same approach as you. I just create an all off sequence and schedule it in the lead out. I actually made my all off sequence from a different profile so that I don't have to make a new one every time my display changes. It's a profile with 100k channels. (which is way more than I'll use in the foreseeable future) The all off sequence is only a few seconds long to keep the file size small.

