FP Version 5.4 help
 
Notifications
Clear all

FP Version 5.4 help

10 Posts
4 Users
0 Reactions
2,303 Views
Posts: 143
Topic starter
(@ndns00ner)
Estimable Member
Joined: 12 years ago

I purchased these Renards used and they were flashed to 115200. I've been using them for several years.


Reply
Posts: 2507
(@mrgrumpy)
Famed Member
Joined: 12 years ago

Mike, have you tried testing with the FPP internal test.
Where is your music coming from....player sequence?


Reply
Posts: 143
Topic starter
(@ndns00ner)
Estimable Member
Joined: 12 years ago

I'm only using one PI and I have the FM transmitter plugged into it.

How do I run an internal test?


Reply
Posts: 2507
(@mrgrumpy)
Famed Member
Joined: 12 years ago

-Status/Control
--Display Test
Click Enable . . this will output valid channels . . look below enable to see what FPP sees as usable channels.


Reply
Posts: 143
Topic starter
(@ndns00ner)
Estimable Member
Joined: 12 years ago

Thank your everyone's help & suggestions. After doing all kinds of tinkering with settings and swapping out parts & pieces, I finally found the issue. It came down to the Cat5 cable running from the Pi to the first controller. It was 3rd cable that I had tried out. :unsure:

Now onward to the next issue, I have another controller not working.


Reply
Page 2 / 2
Share: