Fireworks Test
 
Notifications
Clear all

Fireworks Test

12 Posts
8 Users
0 Reactions
28.8 K Views
Electrified3
Posts: 716
Topic starter
(@electrified3)
Prominent Member
Joined: 13 years ago
[#30264]

Here is a little video of some tests I ran with a fireworks model I built for our kids New years Party this year, fireworks without the hazard.

Still a work in progress but this was a hit this year, hope to just get it better from here.

All Credit goes to Lithgow Lights, he was the inspiration, really liked his and just had to try it. Here is the link to my inspiration
http://auschristmaslighting.com/forums/index.php?topic=1869.0

My attempt

Any recommendations or suggestions I am all ears, want to make these a big hit next year!!


11 Replies
jrock64
Posts: 1099
(@jrock64)
Noble Member
Joined: 19 years ago

This thread may give you some ideas even though it is a little dated.
http://doityourselfchristmas.com/forums/showthread.php?11108-My-2010-project

The newer design is here
http://doityourselfchristmas.com/forums/showthread.php?15577-FireWorks-2011-the-MiniRose

Lots of good construction tips here.
http://doityourselfchristmas.com/forums/attachment.php?attachmentid=10752&d=1311121855

I have not written up the latest version that uses 1m strips with 12 segments.
6 branches with 4 spokes each for a total of 28 spokes.

I much prefer the wider angle 3 dimensional effect with multiple branches.

Joel


Reply
Posts: 928
(@arw01)
Noble Member
Joined: 13 years ago

Love those. I have 3 porcupine balls to pick up at Cabella's to make ones similar to Combustionmarks from the academy.


Reply
Electrified3
Posts: 716
Topic starter
(@electrified3)
Prominent Member
Joined: 13 years ago

A little more tweaking and playing with the fireworks, used them at the campground this year since we couldn't have actual fireworks. 1 leg of the one was out. Height was about 12'.


Reply
Tegbert
Posts: 276
(@tegbert)
Reputable Member
Joined: 13 years ago

That is awesome good job!

Travis


Reply
DrNeutron
Posts: 2018
(@drneutron)
Noble Member
Joined: 14 years ago

I think they are awesome! the only thing that would improve on that would be some small strobes at the ends of each spoke to finalize the explosions a bit (dirk has the dirkcheap strobes which would fit the bill). Great job!
:v:


Reply
Electrified3
Posts: 716
Topic starter
(@electrified3)
Prominent Member
Joined: 13 years ago

I might be able to just custom model the last few pixels on each spoke and sequence them to strobe at the end as well. Might have to play with that a bit, thanks for the idea!

Might have a sponsor to build a full scale display of these for this year, just pitched a large display 16 of these with various sizes up to 12' in diameter and 25' tall, they seemed pretty pumped about it, will see in the next little bit if they have the funds to put this into a large scale display!


Reply
Posts: 1133
(@toozie21)
Noble Member
Joined: 19 years ago

Nicely done, I like them!!


Reply
Posts: 928
(@arw01)
Noble Member
Joined: 13 years ago

You did a great job. I had hoped to get my "fireworks" up in a big tree this year.

On the strobe at the end idea, I was considering leaving my strips long on a few of them to dangle down from the ends so you could get more of the "decay" of a firework.


Reply
Posts: 3
(@maryaguila)
New Member
Joined: 12 years ago

Strobes are a great idea!


Reply
Page 1 / 2
Share: