Notifications
Clear all

Kmart

7 Posts
5 Users
0 Reactions
5,289 Views
Posts: 175
(@aususer)
Estimable Member
Joined: 17 years ago

I bought a stack of these 262led strings - both "straight" and "icicles" - they were only $8.95ea on the sales..

They having instant gratification (keep the 'opposition leader' happy) - and wire them up parallel to an old 24VAC 2A transformer I have here - work perfectly with the controller.. haven't worked out how many amps its pulling (job for today I think)

but the plan is to cut the leds into single colour strings - splicing two sets together - and use a stack of heatshrink, solder and silastic - and patience - to make 3-4 colour runs and cut the controller off...
eventually.

Anyone done any mA /Voltage calculations on these yet. I haven't yet found my variuable PSU so not yet worked out the requirements via DVM...
hoping someone might have done the "hardwork" already.

I agree with OP - they appear to be 4 colours on 2 strings - Green/Blue and Red/Yellow (from memory)


Reply
Posts: 556
 jpb
Topic starter
(@jpb)
Honorable Member
Joined: 19 years ago
aususer wrote:

Anyone done any mA /Voltage calculations on these yet. I haven't yet found my variuable PSU so not yet worked out the requirements via DVM...
hoping someone might have done the "hardwork" already.

I agree with OP - they appear to be 4 colours on 2 strings - Green/Blue and Red/Yellow (from memory)

I will eventually get around to calculating these but I will first need to get a power supply. I will probably build a quick and nasty rectifier for an existing 24VAC transformer and then fiddle around with series resistors to get the appropriate current.

Don't hold your breath though, now that Christmas is over I need to get back into home reno mode for a few months.

Jon


Reply
Page 2 / 2
Share: