disposable camera F...
 
Notifications
Clear all

disposable camera Flashes

4 Posts
2 Users
0 Reactions
2,626 Views
Matt_Edwards
Posts: 2664
Topic starter
(@matt-edwards)
Famed Member
Joined: 18 years ago
[#7465]

After asking the local Big-W to collect any used disposable cameras only to find they were always thrown out just before I came to pick them up and the local Photo shop owner just looking like I'm a twit for asking (what offended me most with this person is he had no idea if I was a twit or not!) I finally scored 30 used flashes on ebay.

The seller still has some left if anyone is interested. seller: gelandangan

Cheers
Matt


3 Replies
Posts: 2
(@gelandangan)
New Member
Joined: 17 years ago

Gday mate,
I am the gelandangan on eBay.

Yes I got plenty of these flash modules left.
Being an electronics engineer, I could also help with designing and modification advices.

What are you guys using these for?
I have made a few self flashing modules running with low voltage line around my shop to attract attention.
I figure it could definitely be used for some sort of outdoor display if the whole unit can be encased inside a zip lock bag.

You could contact me through eBay messenger or post here.


Reply
Matt_Edwards
Posts: 2664
Topic starter
(@matt-edwards)
Famed Member
Joined: 18 years ago

Welcome to the world of Do It Yourself Christmas Lights.

Most of us want to use them as Triggerable strobes in light displays. I haven't finished my design yet so can't really elaborate, but basically i am building a 340Vdc power supply (rectified isolated mains) and ditching the little slow PS on board. I will then control the strobe via Solid State Relay.

I haven't progressed far as I haven't found a decently priced 240v/240v isolation transformer.

What are your intentions here on the forum?
Are you wanting to sell item directly?
Are you offering design services?

Cheers
Matt


Reply
Posts: 2
(@gelandangan)
New Member
Joined: 17 years ago

Hi Matt,
thanks for the welcome!

It may sound like a good idea to supply the capacitor directly with 340Vdc.
However, please ensure that the little xenon bulb have enough cooling time between firing.
I have one of them exploded on me when I try to do it similar way.

Another thing to wary about is the fact that with high voltages whether they are DC or AC are scary.
Even with isolated mains they can be enough to kill or maim.
Be very careful with your insulation for power transmission lines.

A good way to provide high voltage dc is using old computer PSU.
You will have to rewind or change the transformer but they have isolation circuits already built in and
due to their high frequency oscillations, you dont even need large transformer.
(maybe even using a 1:1 audio transformer)

I visit this forum because you put my contact here.
There is no ulterior motive but to find out what the little flash boards are being used for.
You can buy them from me, or from anybody else, no hard feelings.
If I know something that may help then I would pipe up, otherwise I will be a lurker.


Reply
Share: