Wireless DMX
 
Notifications
Clear all

Wireless DMX

9 Posts
6 Users
0 Reactions
5,942 Views
michaelc
Posts: 1540
Topic starter
(@michaelc)
Noble Member
Joined: 19 years ago
[#13951]

Prior to my recent build of the RPM DMX Dongle. I was reading through all the old posts leading up to it. I vaguely remember coming across a note from RPM about a Wireless DMX option to go with the DMX dongle.

Has there been any work on this? I'm planning next years show and a wireless DMX option would simplify my next channel jump immensely.


8 Replies
Posts: 333
(@ron-d)
Reputable Member
Joined: 19 years ago

check www.diylightanimation.com I used that wireless setup up to 375' with no issues and no lag all year.


Reply
Posts: 2630
(@dynamoben)
Famed Member
Joined: 19 years ago

Interesting I wonder if he was going to use XBee. What do you mean by "channel jump"?


Reply
michaelc
Posts: 1540
Topic starter
(@michaelc)
Noble Member
Joined: 19 years ago

By Channel Jump, I'm going from my current 4 LOR boards and adding 2 REN48LSD's if not 3.


Reply
michaelc
Posts: 1540
Topic starter
(@michaelc)
Noble Member
Joined: 19 years ago

ron d,

thx. I checked it out. RJ looks like he has a solution. Just need to see if any PCB's are left. Parts list is on mouser and the "MOD" required on the chip to use an external antenna has a video on the wiki.


Reply
Page 1 / 2
Share: