MaxS wrote:From what I understand, ACN is a protocol in the same way that HTTP, FTP, etc. are protocols, so you should be able to send other data over the network without problems.
Let me explain it this way:
DMX is just a protocol that travels down and RS-485 connection. ACN is just a protocol that travels down an Ethernet connection.
DynamoBen wrote:Let me explain it this way:DMX is just a protocol that travels down and RS-485 connection. ACN is just a protocol that travels down an Ethernet connection.
Yes, but since it is layered over UDP/IP, my question is can other data be passed through the network without problems? E.g., Vixen's remote client data for remote configuration and administration away from the server.
MaxS wrote:Yes, but since it is layered over UDP/IP, my question is can other data be passed through the network without problems? E.g., Vixen's remote client data for remote configuration and administration away from the server.
Not a problem, ACN can co-exist with any other protocol.
ACN is treated differently than older Ethernet lighting protocols. For example in a Net2 system you have to run it on an isolated network. This is done not because Net2 can't co-exist with other network traffic but because you wouldn't want your network dragged down by other IT related problems during a show. A poor performing network could mean an abrupt end to your show.
