Two DMX Controllers
 
Notifications
Clear all

Two DMX Controllers

8 Posts
5 Users
0 Reactions
9,789 Views
Matt_Edwards
Posts: 2664
(@matt-edwards)
Famed Member
Joined: 18 years ago
khargy wrote:
Also after my fiance saw some of the tests I've been doing she wants me to setup lights at our wedding in November. Altough you can't do any elaborate music timed sequences it is able to basic scenes and fades and whatnot. It'll be much easier to setup and for someone to control then say a computer.

Getting married and playing lightie at the same time, that's a challenge!;)
Hope the day goes well.

BTW, I too used the Open DMX Widget for my first year. I blew the RS 485 chips, but that was more related to my set-up not the device.


Reply
Posts: 597
(@entropy)
Honorable Member
Joined: 19 years ago

If you wanted to build your own "merger" device, you would probably need a microcontroller with 3 UARTs - two for DMX reception, one for DMX transmission. Unfortunately this drives a pretty beefy system.

Unless you wanted fancy merging logic (channel A is the maximum of channel B from universe 1 and channel C from universe 2, etc), it would be easy just to have two fully separate and independent DMX universes.


Reply
Posts: 2630
(@dynamoben)
Famed Member
Joined: 19 years ago

The most common merger protocol is HTP (highest takes precedence) on a channel by channel basis. In code you would need to compare each channel in each stream and send the highest of the two.


Reply
Page 2 / 2
Share: