Smoother DMX effect...
 
Notifications
Clear all

Smoother DMX effects?

4 Posts
2 Users
0 Reactions
2,681 Views
Posts: 327
Topic starter
(@thebaronn)
Reputable Member
Joined: 17 years ago
[#29755]

Hello

I hope this is the correct place for this question. And it may not be something that is fixable. When using multiple DMX universes accross E1.31 in a matrix, I can notice the actual DMX universe groupings when effects are fast. Is there a setting to tweak to fix that, or is this just a nature of the beast?

I mean right now I could think of one way by having the pixels in a universe in a horizontal layer so that is there was any lag or blips, it would be centralized.

Does this make any sense?

Here is the clock tower we made this year, the starting time should be at 52 sec. But you can see chunks of pixels light up split seconds before other pixels in the same area. They are the different DMX universes.

Thank you for your input
Eric

Ok, it didn't work, please scroll to 52sec.


3 Replies
Posts: 2630
(@dynamoben)
Famed Member
Joined: 19 years ago

What controllers are you using? What software are you controlling them with?

Usually these sorts of issues are related to latency in the controllers.


Reply
Posts: 327
Topic starter
(@thebaronn)
Reputable Member
Joined: 17 years ago

Guess that would have been all helpful information.

Using LOR to run the show.

Using the Sandevices E682 controllers. On the clock tower 1 controller has 100 pixels/port, theother 2 controllers have 48 pixels/port.

Thank you
Eric


Reply
Posts: 2630
(@dynamoben)
Famed Member
Joined: 19 years ago
thebaronn wrote:
Using the Sandevices E682 controllers. On the clock tower 1 controller has 100 pixels/port, the other 2 controllers have 48 pixels/port.

I would contact Jim, this is likely a firmware issue.


Reply
Share: