JEC,
Looking at your website today. It seems that the "older" version would be brighter since it has 6 LED per color. Is this a true statement? If some one was to look for next years project which one would you recommend?
ibby wrote:Off topic MPH but I can never get your web link. Is it a function site?Ibby
Did you read my signature?
ibby wrote:JEC,Looking at your website today. It seems that the "older" version would be brighter since it has 6 LED per color. Is this a true statement? If some one was to look for next years project which one would you recommend?
Different designs for different applications.
The original pixels are meant to be enclosed in a diffuse material or pointed at a wall or screen. They're quite bright - almost unpleasantly so at close range - and work best when softened. Putting them in globes, plastic containers or behind bits of Lexan works fabulously well. I've also had great success with theatrical 'diffusion' gel. I personally don't like seeing the discrete color emitters, but your mileage may vary.
The smaller design is meant to be an actual lighting fixture. It's friendly on the eyeball and the color mixing is automatic. They can be viewed directly without seeing the three separate color chips.
In terms of raw brightness, the original design wins.
However, I would estimate that the point source design reads equally well as the neighbors' C9 clear / white bulbs from several hundred feet away.
JEC wrote:
Finally, a couple of us were chatting last night about (possibly) editing the pixel string code to speak Renard. Then, no DMX dongle would be necessary. Just serial via RS485. It would certainly be a springtime project.
That seems pretty retro to me. it should be easy to do, but seems pointless. One problem that I see is that you would need a good RS485 converter, not one of the cheap Ebay versions. The reason for this is that you would be driving a multiple-receiver line, and may not be able to get by without a line terminator. And the cheapy RS232-RS485 converters cannot usually drive a terminated line, as they cannot get enough power out of a RS232 port. So you are back to requiring either a USB-RS485 converter or a powered RS232-RS485 converter (if such things exist). So in the end I don't see any advantage to doing this. The current scheme seems like the better way to me.
P. Short wrote:That seems pretty retro to me. .
The other possiblity is using an old Apple II, THat would be retro. I aggree with you about the RS485 issue. As a general rule those $10 units are not so flash, and i avoid them like the plauge.
I personally would'nt use REN, simply because its not so practical for what i'm doing ( my controllers are spread over a long distance and theres many many many of them..
I suspect that the ethernet/ip option will win out in the end for me. With the desire for every light fixture to be contronable, I just have too many things to control in any sensible format.
