MSP430 LaunchPad DM...
 
Notifications
Clear all

MSP430 LaunchPad DMX code examples

44 Posts
10 Users
0 Reactions
26.7 K Views
dmcole
Posts: 2196
(@dmcole)
Noble Member
Joined: 19 years ago
IdunBenhad wrote:Hi:
Am I just dense and don't know how to do it? Do you have a suggestion as to how to get registered?

FWIW, I just signed up through Google Plus -- a click on the GP link, fill out the user name and city and I was on the board. Since using GP means there's no email verification, it was the least painful forum signup I've ever been through.

YMMV if you're not on GP ... I had to finally break down and join a few weeks ago because an Open Source project I follow moved its support discussion over there.

HTH.

\dmc


Reply
RobG
Posts: 1255
 RobG
Topic starter
(@robg)
Noble Member
Joined: 14 years ago

I have spent an hour trying to figure out my timing issue just to find out it is not a timing issue. It's interference. I will have to use shielded wires to connect multiple WS2811 strings to my MCU.


Reply
timon
Posts: 2149
(@timon)
Noble Member
Joined: 16 years ago

Rob,

Do you have a series resistor, 33 to 75 ohms or so, leading to the data line?


Reply
RobG
Posts: 1255
 RobG
Topic starter
(@robg)
Noble Member
Joined: 14 years ago

There are two suspects, data lines and power lines.
I have noticed that when I remove every other row, everything works as expected (this doesn't surprise me, those wires behave as a little radio antennae.)
However, when I power neighboring strips from 2 different points, no problems as well.
I will rewire my matrix tomorrow and see which one is it.
Other than that, the software works great.

Also, I have decided to change my design and use more powerful chip. This change will not affect the price but will give me much more room to play.


Reply
timon
Posts: 2149
(@timon)
Noble Member
Joined: 16 years ago

So Rob, what do you think of the 430's vrs PIC's and AVR's.


Reply
Page 6 / 9
Share: