LED DMX512 Controll...
 
Notifications
Clear all

LED DMX512 Controller

10 Posts
7 Users
0 Reactions
11.9 K Views
Posts: 2
Topic starter
(@chamberplus)
New Member
Joined: 18 years ago
[#3771]

All guys

I would like to announce a idea :

A more cheap, small and friendly Christmas light using the LED DMX512 system's product!

It would not pool function and few LED flash program due to the cheap and small !

I hope the DMX512 is not only professional technology, but a more easy and simply DIY utility for everyone !

Maybe everyone can give me some advice ?!
...

Of course, I already finished a prototype about this idea.

Sharing a demonstration kit as below!

http://tw.youtube.com/watch?v=zsqSSK4if2M

and

http://tw.youtube.com/watch?v=BcpXkgfyoJo

As I mentioned as above, My son who is ten years old,

he can play the LED by himself in video...

He could enjoy the funny of LED control even he does not understand DMX512 or electroincs...
...

I think this kit not only a idea kit, that is a application platform, too !

I will enhance the supported amount of the LED play mode!

Let it match more application field...Or, enrich to lighting every X'mas time !

---
Any comments will be welcomed !

Thank you !

My email : lchamber@ms8.hinet.net


9 Replies
dmcole
Posts: 2196
(@dmcole)
Noble Member
Joined: 19 years ago

Chamberplus:

Thanks for sharing your videos.

It appears you have developed two products, the USB2DMX controller and the Chamberplus Windows application that controls the USB2DMX controller.

Most of us here would only be interested in the controller and not the software. The desire here is not to just play random light sequences, but to synchronize lights to music (mostly Christmas music, but other holiday music as well).

Have you attempted to run the USB2DMX controller through Vixen? It should work with the Enttec Pro plug-in. I'm sure everyone here would be interested in seeing a video of the controller running under Vixen, as that it the control software used by the vast majority (99.9%+) of the members of this board.

Further, we are a collection of do-it-yourselfers (hence the name); is the USB2DMX controller a build-it-yourself project or will you be selling the devices already made?

If you are selling ready-made devices, there are other web site forums where you might get more interest -- specifically PlanetChristmas.com and SynchronizedChristmasLights.com.

Best of luck.

\dmc


Reply
Posts: 2630
(@dynamoben)
Famed Member
Joined: 19 years ago

chamberplus your device looks very interesting. With that being said the site is dedicated to the DIY community we look forward to seeing some schematics or a coop with a more serior member.

If however this a commerical product you may want to market your device on the previously mentioned forums. 🙂


Reply
Posts: 2
Topic starter
(@chamberplus)
New Member
Joined: 18 years ago

As my original idea, I would like to provide a easy and simply DMX512 Controller for LED controller. DMX512 is a great product, but it is not professional for someone. It should be
popular for people...For our earth environment, apply more LED is benefit to us, especially !

So....
This Controller can be connect to PC via USB, update the display programs.
And, it can run the display programs in stand-alone, too !
About the DMX dimmer(LED light bar), I used few components to achieve the function in video.
I think that can provide more easy to construct the DMX512 LED light system !

Thank you for your comments. I will survey the feasiblility of Vixen application.
Maybe, Is it possible to build the connection with Vixen... and store the playlist from
Vixen application... and play the display program in more easy and simply without PC...
maybe...it can provide more easy and cheap play LED tool for people...
maybe ...it can apply to smaller adornment or furniture, not outdoor only....
maybe...

I tried to look the sale channel to sell my DMX512 controller in Taiwan, recently.
Someone would like to apply this controller to commerical neon light, such as channel letter in Taiwan. There are so many LED manufactures looking for High-power Color LED application field in Taiwan!

Anyway... Thank you !

(Sorry... I like to post some pictures of my DIY...But it seems fail...)

This is my DIY product....


Reply
Posts: 2630
(@dynamoben)
Famed Member
Joined: 19 years ago

At the moment this item doesn't seem to fall into the "do it yourself" catagory. Chamberplus I'm not sure what your intentions are for this product, but you need to be aware of the terms/rules of this forum in regards to the direct sale of products.

"...it is the policy of DoItYourselfChristmas.com to not allow the direct sales of manufactured products on this site. Any member deemed to be doing so will be warned the 1st time and subsequent offenses will result in account termination. The decision of the site Admin(s) is final. An exception to this rule is if you are selling a used item in the buy/sell/trade forum. These sales will be limited and discretion will be used to determine if the sale is in violation of the site policies."

If your intention is to sell a manufactured product then this isn't the forum for you.


Reply
Posts: 1062
 Ronp
(@ronp)
Noble Member
Joined: 20 years ago

I too think this is a intresting product. Cool but I wouldnt find a good use for it in my display.
I would look into marketing it more towards dance floors, concert stage effects, car shows amusment rides ..
somewere there is a want for it


Reply
mrpackethead
Posts: 2289
(@mrpackethead)
Famed Member
Joined: 19 years ago

Welcome Chamberplus to DIYC.. Its great to see you and welcome you to the board... I'm sorry if some people already seem to be 'angst' about your post. Mostly the people here are friendly.


Reply
Posts: 12
(@snarfer)
Active Member
Joined: 19 years ago

I'd like to know more about the DMX ASIC. How is it configured? Does it support RDM? Where can it be obtained? Who manufactures this ASIC?


Reply
Posts: 121
(@vairmoose)
Estimable Member
Joined: 19 years ago

Chamberplus.. a few questions that might help us to understand your intent:

Is the PCB for the ASIC something that can be made at home or does it require a manufacturer.

Is your controller the only way to control the ASIC led strips?

Are the LEDs in the ASIC addressable and controllable as individual addresses under DMX?

Thanks

Larry


Reply
Posts: 12
(@snarfer)
Active Member
Joined: 19 years ago

Just to be clear, by asking about the ASIC, I am referring to the IC that is circled in one of the pictures along with the notation "DMX ASIC." It might be useful for one of my own designs. ASIC stands for Application Specific Integrated Circuit, for anyone who is not familiar with the term.

According to Wikipedia: "The Non-recurring engineering cost (the cost to set up the factory to produce a particular ASIC) can run into the millions of dollars." In light of that statement I don't believe that it is possible to manufacture an ASIC at home. But please correct me if I am wrong!

This is why for smaller production runs where a custom IC is needed, it is often more cost-effective to use an FPGA (Field Programmable Gate Array) or a CPLD (Complex programmable logic device), either of which could actually be programmed at home or in a small shop.

I don't mean to be patronizing by explaining this. I'm sure there are other users who are a lot more familiar with this kind of technology than I am, but just to explain so that anyone reading this thread would not be confused as to what I was referring to.

If there is an ASIC for DMX reception available for purchase from some company, that would be really great for everyone who wants to make their own DIY controllers, especially if it is really cheap! So that's why I would like to know about this chip.

Someone circled it in the picture, so let's hear about it! How much does it cost? Where can I buy it? (Not the board, just the IC).


Reply
Share: