Hello, I am trying to set up my lights with vixen like a 1 week.
I am just tried to download various version about Vixen, I just tried to use in a Windows 7 64bit and a Windows XP 32 bits, and aways have the same problem.
I have 14 tube leds with 18 channels each one.
When I turn some channel, like channel 1 for exemple, the other channels start to flashing in all other tubes led randomly, its totally frustrating, its the only free software who have a Timeline, and I can't set up.
Have you tested these tubes with either a lighting console or DMX tester? It sounds like your problem is with the tubes and not vixen or the OpenDMX dongle.
When I use with Freestyler or ShowMagic works perfectly just in Vixen I have problem. Without the DMX the tube work fine too in auto mode.
I am totally frustrated because its too hard to automate without a timeline, if you know another free software with timeline to control the lights I really want to know!
Thankyou.
If you're using the Open dongle, be sure to start the DMX Add-In (note Add-In - not just the PLUG-IN) - this keeps the DMX stream running full time when Vixen is running. I'm assuming you have determined the correct Com port used by the dongle and have configured the plug-in accordingly.
MichelVictor wrote:When I use with Freestyler or ShowMagic works perfectly just in Vixen I have problem. Without the DMX the tube work fine too in auto mode.
I am totally frustrated because its too hard to automate without a timeline, if you know another free software with timeline to control the lights I really want to know!Thankyou.
Not sure if this is helpful, but are you also running Hippy's OpenDMX VB driver? I seem to remember when I started with Vixen there was a clash.
Hello budude!
I am just tried to use the ADD-In, and the problem persist.
Hello Matt_Edwards!
Probably I am not running Hippy's OpenDMX VB because I don't know what is it hehe.
What make and model are the LED tubes?
When I turn on some of the channels the other lights come to flash random.
I lost the manual, i forgot the model.
MichelVictor wrote:
I lost the manual, i forgot the model.
That is critical to this troubleshooting because there are some LED tubes that have known DMX timing problems.
