I chose dmx when setting up my displays because I was familiar to the system setup from when I was in college...
those systems were already setup for me to use
now that I set this system myself, it seems that the data stream times out after about 10 min, especially when I hold the display in a black out or all on even when using common stage lighting dmx control software (I've tried so many to try to remedy the problem while holding a blackout during the day that I can't even remember which ones).
at first I thought the computer went into hibernate mode, but found that wasn't the case.
using an entec open USB dmx which then runs to my daisy chain of dimmer/switches.
has anyone experienced something like this and come across any remedies?
The open dmx relies on the PC constantly pumping data out the port. I have a suspicion you may be running into a situation where your USB ports go into a power save mode when they detect no new data coming in. If you go into your advanced power saving options, there's should be an option related to USB power saving. Make sure that's completely off.
I'll look into it... I got so used to using Linux where everyhring was hidden in XML... this windows 7 thing is confusing me
