ws2801 how do they...
 
Notifications
Clear all

ws2801 how do they work ?

15 Posts
9 Users
0 Reactions
8,670 Views
Posts: 1076
 Zeph
(@zeph)
Noble Member
Joined: 15 years ago
david_1 wrote:
The pwm setting for each led is from 0 to 255, 0 being off and 255 being fully on but anything over 100 seems to look the same, my thoughts are that I run out of current to increase brightness .

Hmmm. Have you tested to see if 5v supply dropping too much under load? What kind of current are the 15 pixels drawing?

You should see some notable difference between 100 and 255 (even tho given the sorta logarithmic response of the eye, it won't be dramatic).

I belive the ws2801 is usually configured as a constant current driver.

As for protocols - most folks are probably using DMX512 (which can control 512 eight bit outputs or about 170 RGB pixels, per "universe") or e1.31 (which is basically an ethernet encapsulation of multiple DMX512 "universes") as the intermediary protocol between a computer and the controller which translates to the pixel protocol (like ws2801, but there are multiple others). There are exceptions. Various PC software speaks DMX512 (through a dongle) or e1.31 (via lan) to then control the pixels.


Reply
Posts: 214
(@gary-martin)
Estimable Member
Joined: 18 years ago

BGR order is pretty common with strips from Asia.

Cyan, Yellow and Purple are the standard combinations for BG, RG and RB respectively.

david_1 wrote:well they arrived two 5 meter strips arrived, i cut off 15 leds for a test strip. They seem very easy to control I have
; BLUE GREEN RED if i turn on just one led in the 5050 package.
or light blue yellow purple if I turn on two leds
an white if i turn on all three.

The pwm setting for each led is from 0 to 255, 0 being off and 255 being fully on but anything over 100 seems to look the same, my thoughts are that I run out of current to increase brightness .

I can fade each light in and out, now im fading up to D'100' because this look ok and will save power over all.

all of this is done with a pic and assembler

anyone else working on these ? I have no clue about any of the protocals you guys use to control your displays or which I should try to emulate. I am building a single flashing star about 4 foot in size 🙂

David


Reply
Posts: 3277
 Jrd
(@jrd)
Famed Member
Joined: 19 years ago
david_1 wrote:...
anyone else working on these ? I have no clue about any of the protocals you guys use to control your displays or which I should try to emulate. I am building a single flashing star about 4 foot in size 🙂

David

Why don't you want to use controller that already exist? Is this a standalone prop?


Reply
Posts: 1
(@vincent81)
New Member
Joined: 15 years ago

Last week, I ordered one reel of ws2801 based RGB LED strip for 129 bucks. The RGB strips contain a number of individually addressable RGB LEDs - in this instance 32 per meter. Each RGB pixel has its own tiny controller to control its color. After successful playing around with it, I plan to order a bigger quantity.


Reply
Posts: 214
(@gary-martin)
Estimable Member
Joined: 18 years ago

If you're talking about a 5 meter LED strip with WS2801 controller chips on it, you should be able to find that for about $65 or so.

vincent81 wrote:Last week, I ordered one reel of ws2801 based RGB LED strip for 129 bucks. The RGB strips contain a number of individually addressable RGB LEDs - in this instance 32 per meter. Each RGB pixel has its own tiny controller to control its color. After successful playing around with it, I plan to order a bigger quantity.

Reply
Page 3 / 3
Share: