Wireless serial mod...
 
Notifications
Clear all

Wireless serial modem

52 Posts
17 Users
0 Reactions
18.2 K Views
kmc123
Posts: 824
(@kmc123)
Prominent Member
Joined: 19 years ago

If you need someone to build and test one, let me know...


Reply
rstehle
Posts: 4348
(@rstehle)
Illustrious Member
Joined: 19 years ago

I would be happy to test these out also!


Reply
FireGod
Posts: 655
Topic starter
(@firegod)
Honorable Member
Joined: 19 years ago

Range: I tested 300 feet unobstructed at 115.2 kbps with zero errors on a loop back test last year (128 byte packets). My Aerocomm is not that good for some reason. The Aerocom has alot more range but I had no trouble with the first 20 or so bytes, they were perfect but the last 10 or so had a bunch of noise and did not work perfectly.

One nice thing about the Xbee, I think you can purchase the ZigBee model and it also can act as a repeater and relay data to extend the range. I am using the Xbee Pro and do not plan to use the ZigBee.

I should get one built early next week and if it works, I'll send some to you guys to see what you think. I hate to waste your money, I'll waste mine first.


Reply
FireGod
Posts: 655
Topic starter
(@firegod)
Honorable Member
Joined: 19 years ago
NogginBoink wrote:The XBee may be a little overpriced for what you're using it for. Check out the folks at www.linxtechnologies.com; they may have something more appropriate for this application.

Here's the problem, they don't even claim their BEST product can do more than 56,000 bps. So 57,600 bps is out of the question (I think this is the data rate used by large Renard systems). My system normally operates at 115,200 bps. Xbee claims a max rate of 250,000 bps.

Plus, most of their items are surface mount (not good for DIYers). I looked at the price of their SIP receiver at Digikey and it was $12.00 more than the Xbee Pro. The transmitter was $2.00 less. The Xbee is a transceiver.

Did I miss something here? Am I wrong? Help me out here if I missed something.


Reply
Posts: 919
(@scorpia)
Noble Member
Joined: 19 years ago

FG,

Very nice work, these modules do look very nice.

I will have to revisit the Xbee units as for some reason i thougth they were limited to 56k. but after what you said i double checked and yes 250k looks nice. hell thats almost DMX speed.

As mentioned they arnt the cheapest thing on the planet for wireless but they arnt the dearest either. And from what i read they are very easy to work with. Much easier that the module i decided to have a play with,which is http://ap.nuhorizons.com/linecard/nordic/NordicA4.pdf

they are only about $5 per module + shipping but i dont think they have anywhere like the range of the xbee units.

I would be interested in a set of boards to have a play once its all finished.

If the interest is there would you consider a coop of these boards given the right time etc? (either run by yourself or someone else.)

anyway nice work lets hope they work as expected etc.

Question.

im guessing here but do i see spots for 2 voltage regulators? 1 5v and 1 3.3v?
if that is the case why not use just 3.3v?


Reply
Page 2 / 11
Share: