Ok so I got suckered into the build your own CNC website.... Talk about an educational, but interesting experience!!! If you have 3-4 hours to kill, and computerized routers interest you; gotta check it out.
Now for the meat and potatos.... I ran across a website that the CNC guys were bragging about and ran across this little duber:
http://www.sparkfun.com/commerce/product_info.php?products_id=582
Anywho, just and idea...
~Kendall
I use the BlueSmirf radios in my robotics projects and they ROCK!
There are two at SparkFun that I've used and can vouch for:
http://www.sparkfun.com/commerce/product_info.php?products_id=8180
and
http://www.sparkfun.com/commerce/product_info.php?products_id=158
The second one has an sma antenna mount for greater distance, but other than that they are the same...
I wonder if you could remote a DMX dongle using this method?
Dont know if they would be fast enough for dmx
.
Sparkfun also sell the xbee module which is cheaper, faster and will give greater distances.
XBee is not bluetooth but use the zigbee protocol.
http://www.sparkfun.com/commerce/product_info.php?products_id=8768
I do like the USB connection on the Bluetooth modem.
Sparkfun sell a usb adaptor board for the xbee which simulates a serial port.
I am using the xbee modules currently for wireless to a ren64.
Well actually neither of them is fast enough for DMX. I wish the xbees were, as it would of made it easy for me to create the wireless DMX modules. But you need 250,000 bps throughput to do DMX. The problem is that while the xbee's RF rate is 250kb the overhead builtin drops you to the range of somewhere between 57k - 80k for throughput (how much of your data gets moved). I have played with them and if you only need that amount they are so simple and easy to use I recommend them. They would work great for the people using renards at 57k. But I was forced to go another route and write the protocol to handle DMX.
RJ
