Renard-WC Wireless ...
 
Notifications
Clear all

Renard-WC Wireless Controller

266 Posts
47 Users
0 Reactions
119.3 K Views
dirknerkle
Posts: 10310
Topic starter
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

Ricky, I do believe you've found a second antenna style for this gizmo, nice going! That would provide the option to attach a higher-gain antenna for some extended range.

Still don't know how well the thing works though -- won't know until we start messing with it!

-dave


Reply
dirknerkle
Posts: 10310
Topic starter
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

Woooo-Hooooo!!! My Roving Networks XBee-drop in Wi-Fi modules arrived today... one with a Mini-Whip, one with a SMA connector and one with the U.Fl connector. It's almost enticing enough to make me skip a dress rehearsal tonite for a Bach Cantata performance tomorrow...

Hmmm..... how can I weasel out of that dress rehearsal...


Reply
rjchu
Posts: 1191
(@rjchu)
Noble Member
Joined: 17 years ago

Do it! I'm curious to know how these work out. I'm also curious about the three analog inputs mentioned in the specs. Could these be used for feedback data? Say a car counter???

Thanks,

-joni-

dirknerkle wrote:Woooo-Hooooo!!! My Roving Networks XBee-drop in Wi-Fi modules arrived today... one with a Mini-Whip, one with a SMA connector and one with the U.Fl connector. It's almost enticing enough to make me skip a dress rehearsal tonite for a Bach Cantata performance tomorrow...

Hmmm..... how can I weasel out of that dress rehearsal...


Reply
Posts: 3277
 Jrd
(@jrd)
Famed Member
Joined: 19 years ago
dirknerkle wrote:Ricky, I do believe you've found a second antenna style for this gizmo, nice going! That would provide the option to attach a higher-gain antenna for some extended range.

Still don't know how well the thing works though -- won't know until we start messing with it!

-dave

Yay! Thanks. :biggrin2:

dirknerkle wrote:Woooo-Hooooo!!! My Roving Networks XBee-drop in Wi-Fi modules arrived today... one with a Mini-Whip, one with a SMA connector and one with the U.Fl connector. It's almost enticing enough to make me skip a dress rehearsal tonite for a Bach Cantata performance tomorrow...

Hmmm..... how can I weasel out of that dress rehearsal...

Tell them you just got some new parts in and you must try them out immediately.:wink:


Reply
ErnieHorning
Posts: 4434
(@erniehorning)
Famed Member
Joined: 19 years ago

Come on Dave, you’re retired and sleep is so overrated anyway. This should have already been done when we woke up this morning. :wow:


Reply
dirknerkle
Posts: 10310
Topic starter
(@dirknerkle)
Illustrious Member
Joined: 18 years ago
ErnieHorning wrote:Come on Dave, you’re retired and sleep is so overrated anyway. This should have already been done when we woke up this morning. :wow:

ROFLMAO!!!

I did get a few minutes to play with it after midnight last night so I've only scratched the surface, but here's what I will suggest to everyone so far:

This project is not appropriate for individuals who do not already have a working knowledge and understanding of wireless networking configuration and operation issues.

The modules may be configured via it UART or TELNET, but all configuration settings are changed and saved via command line interface. There apparently is not a graphical user interface such as XCTU software with the XBee radio module, although it appears that XCTU's terminal mode can be used to configure the radio via its UART. It also appears that the USB XBee Explorer board can serve as a programming platform for these Roving Networks modules, and this is yet another reason for one to purchase the Explorer board.

It's doubtful I'll get much more time with it until the weekend, but I thought I'd get started by answering at least a couple questions...


Reply
dirknerkle
Posts: 10310
Topic starter
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

I've stopped writing about the Roving Networks things here in the forums; instead, I've created a Blog about it with the thought that it'll be easier to maintain continuity. And the research continues...


Reply
Posts: 4092
(@skunberg)
Famed Member
Joined: 18 years ago
dirknerkle wrote:I've stopped writing about the Roving Networks things here in the forums; instead, I've created a Blog about it with the thought that it'll be easier to maintain continuity. And the research continues...

Bummer.

Brian


Reply
Posts: 3277
 Jrd
(@jrd)
Famed Member
Joined: 19 years ago
Skunberg wrote:Bummer.

Brian

For any that aren't aware of it, this forum system has a blog addon and you can view Dave's blog here.


Reply
dirknerkle
Posts: 10310
Topic starter
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

I managed to get the Roving Networks RN-XV modules controlling lights today, and if you're interested, all the news about it is in my blog.

And the short answer is yes, it works with the Ren-W.


Reply
Page 26 / 27
Share: