Hi all, a quick post to say I an still working on this but have been silly busy both at work and home.
The shift register board works well.
OLA (link) have added a spi plugin (I have it running on one of my PIs). If you haven't checked it out, I recomend you you give it a try. As I see it, this will run 2 universes (SPI 0.0 & 0.1) each can handle 170 pixels. That gives you 340 pixel control and if you stick in a wifi dongle, it's wireless! With the model A making it's return @ $25, I figure thats at least 50% of the work done.
Will find some time this weekend to do a proper post, with photos and code.
remember you dont' get Ethernet on a model-A
Barnabybear wrote:Hi all, a quick post to say I an still working on this but have been silly busy both at work and home.The shift register board works well.
OLA (link) have added a spi plugin (I have it running on one of my PIs). If you haven't checked it out, I recomend you you give it a try. As I see it, this will run 2 universes (SPI 0.0 & 0.1) each can handle 170 pixels. That gives you 340 pixel control and if you stick in a wifi dongle, it's wireless! With the model A making it's return @ $25, I figure thats at least 50% of the work done.
Will find some time this weekend to do a proper post, with photos and code.
FYI, theres been a lot of work on teh SPI based Pixels over at OLA.. Very capable pixel controlers being made with Rapsbery Pi's for only a few bucks, and they are all open saucse, and dont' have any quirks.. Very DIY and very low cost.
If you combine that wtih ola_recorder which is already bundled in, you also have the ablity to record your material and play it back witout a pc..
mrpackethead wrote:... and they are all open saucse, and dont' have any quirks
I think using open sauce is critical to our homebrew recipes.
