timon wrote:Unless someone beats me to it, which is likely, I'm planing to do a show player that will play HLS files for the Pi. The question is will XLights, with HLS support, get ported to the Pi first. If its going to get ported to the Pi then I'll likely self mine.
I've already compiled XLights successfully on Debian 6.0. I can't imagine cross-compiling for the pi could be terribly difficult. I used code::blocks to get the linux compile which is the IDE used for the development of XLights, but it shows the gcc output, so I should be able to write a quick little GNU Make based build system for linux systems that can include cross compilation. Worst case, it can be compiled on the pi itself, but that might take a while.
Do you know when HLS format will be added to Xlights?
timon wrote:Do you know when HLS format will be added to Xlights?
No clue (or interest, for that matter). Has this been discussed anywhere prior? I don't follow HLS, and I don't really follow XLights either. I just wanted to get something working on linux as a starting point for a couple project ideas I had and XLights being open source was a good start for me.
Hi timon, firstly I owe you an apology for missing out your work on the differential signal receiver / power supply, and only crediting MPH for working on this – sorry.
If you have some spare time, there are 3 or us working on the output side and nobody on the input side.
My thoughts are the project needs to accept E1.31 and output to pixels , DMX or back as modified E1.31.
So the question is: when that is sorted – what do we do about pulling things from memory?
Ideally – the import to memory ‘thingy’ could save a Nutcracker output in a way that appeared to be an E1.31 input when retrieved from memory.
Help on that side of things – would be cool . But I’m always happy to swap ideas.
I know Matt looked at xlights on the pi last year and decided it wasn't a good fit. I'll ping him and see if I can get him to respond.
