Some forum members suggested I create a propeller design that would allow people to create their own I/O boards to control everything from servos, to AC dimmers. So I took my propeller dimmer design and removed the on-board 120V portions of the power supply, dimmer I/O, LCD and buttons, and limited the data input to one type (DMX/RS485, or Ethernet). The goal was to cut the overall cost of making the board, and increase its flexibility (beyond just dimming). This is design is meant to be a building block for other projects and designs.
Personally I'm hoping to use one, or both, of these controllers as a ride show controller this Halloween. To this end I would like you guys to review my design both technically and conceptually, before I wrap up the PCBs.
While the 120V items have been removed I left the ZC sense circuity and rectifiers in place. The idea was if someone wants to do phase-angle dimming they would need to provide an AC supply. Conceptually does this seem reasonable? I also removed the large 4700uF/16V cap and replaced it with something smaller, is this OK?
What else on this design seems incorrect or should I consider/reconsider?
NOTE: I will post the DMX design first and then ethernet (second post) they are functionally the same.
UPDATES:
Jun, 05, 2010 - Revisions on Power supply, USB, Main.
Jun, 12, 2010 - Revisions Main, changed number of I/O per output header
Re: Propeller Controller
Ethernet version
UPDATES:
Jun, 05, 2010 - Revisions on Power supply, USB, Main.
Jun, 12, 2010 - Revisions Main, changed number of I/O per output header
Re: Propeller Controller
I'm seeing a number of file views but no comments yet. I will give this a few more days, I would love some feedback.
Re: Propeller Controller
PropControllerDMXmain.pdf Minor stuff - your output connectors on the left are all called "Output 1" and is there a "J6"? it goes J5,7,8,9...
PropControllerDMXpwrZC.pdf
Is the input voltage really 6-9v? Will 6v work after the diodes and into the 5v regulator? Maybe I missed the discussion - is there a reason you are using zener diodes (1N5913) to rectify the AC?
Re: Propeller Controller
budude wrote:PropControllerDMXmain.pdf - Minor stuff - your output connectors on the left are all called "Output 1" and is there a "J6"? it goes J5,7,8,9...
I will update those labels, copy paste error.
PropControllerDMXpwrZC.pdf-Is the input voltage really 6-9v? Will 6v work after the diodes and into the 5v regulator?
I'm running 6.3VAC into my dimmer project w/o any problems.
Maybe I missed the discussion - is there a reason you are using zener diodes (1N5913) to rectify the AC?
Yes the intention was to rectify AC to DC. At present I'm sensing the AC side for phase angle dimming, the DC side runs to regulators for the board.
