Parts questions
 
Notifications
Clear all

Parts questions

6 Posts
2 Users
0 Reactions
2,884 Views
Posts: 300
Topic starter
(@kiowamike)
Reputable Member
Joined: 18 years ago
[#14036]

Are these parts a match for these schematic symbols? These parts are from another project that I want to attempt. The schematic specifies part numbers for all the other components however, these are left out.

quad nand
relay

http://www.mouser.com/Search/ProductDetail.aspx?R=AQV254virtualkey66710000virtualkey769-AQV254 For the relay

http://www.mouser.com/Search/ProductDetail.aspx?R=74LV132N,112virtualkey66800000virtualkey771-LV132N112 For the NAND gate


5 Replies
Reddy_Kilowatt
Posts: 547
(@reddy-kilowatt)
Honorable Member
Joined: 19 years ago

The relay looks pretty close, but you need to guess the voltage and current rating in your circuit.

The part you picked for the gate does not match the part in your picture.

4011N is a standard National Semiconductor, CMOS logic part.

Mousers http://www.mouser.com/ProductDetail/Texas-Instruments/CD4011UBE/?qs=sGAEpiMZZMv4BkFy%252bbL2aH46LA2pMXOA%2foo%252bJCxsbw8%3d should be good.

-Craig


Reply
Posts: 300
Topic starter
(@kiowamike)
Reputable Member
Joined: 18 years ago

Here is the whole schematic. I believe there is only one volt across the relay.

Capture

Thanks for the advice on the NAND gate.


Reply
Posts: 300
Topic starter
(@kiowamike)
Reputable Member
Joined: 18 years ago
Reply
Reddy_Kilowatt
Posts: 547
(@reddy-kilowatt)
Honorable Member
Joined: 19 years ago

The first relay was a better guess, the Control Voltage Range on this one of 1 V to 1.3 V (what it takes to turn it on) is too low. I'm guessing it should be 5V or a little less.

-Craig


Reply
Page 1 / 2
Share: