Logic Analyzer
 
Notifications
Clear all

Logic Analyzer

32 Posts
9 Users
0 Reactions
16.8 K Views
Posts: 2630
Topic starter
(@dynamoben)
Famed Member
Joined: 19 years ago
[#14357]

I'm looking for a reasonably priced logic analyzer. I'm familiar with the Open Logic Sniffer, and theSaleae Logic USB analyzer, but was wondering if there are others I should consider.

Opinions/thoughts?


31 Replies
Posts: 2215
(@ctmal)
Famed Member
Joined: 19 years ago

If you have a pickit 2 or 3 there's a logic analyzer in there.


Reply
Posts: 2630
Topic starter
(@dynamoben)
Famed Member
Joined: 19 years ago
ctmal wrote:If you have a pickit 2 or 3 there's a logic analyzer in there.

I have a PicKit2 also but was looking for something with a few more channels and higher resolution.


Reply
Posts: 844
(@ags0000)
Noble Member
Joined: 16 years ago

I clearly don't have the impact on this board that you do, Ben (not that I've earned it, I'm just sayin'). I posted this thread yesterday: http://doityourselfchristmas.com/forums/showthread.php?14922-Which-Logic-Analyzer-would-you-buy
I can still hear the crickets in the background with all the responses it's gotten.

I'd add to the list of those I'm considering the USBee SX, similar in price and features to the Saleae Logic but with a digital signal generator and internal buffer: http://www.usbee.com/sx.html

It seems the Intronix Logicport is the most expensive at about $400, but is the fastest at 500MHz and has 34 channels. Personally, I'm torn as I may never need such capabilities for my projects. On the other hand, I have never (really, never ever) puchased a cheap tool "just for this one use" and not ended up regretting it later on when it failed or wasn't extensible for other uses.

This might be just my own personal bias, but assuming the basic features/functions supported by the hardware meet minimum requirements, I tend to look for the most robust, full-featured, intuitive and powerful software. The ZeroPlus LogicCube 16032 is also in the same price range, but I've read many complaints about the quality of the software (and translation to English). Also, I note that you'll get 4 standard protocol analyzers, plus two of your choice with the hardware purchase, but then any additional would be $70 each or $100 for three.


Reply
LabRat
Posts: 2981
(@labrat)
Famed Member
Joined: 17 years ago
ctmal wrote:If you have a pickit 2 or 3 there's a logic analyzer in there.

Have they updated the PK3 software to support add the Logic Analyzer support?? Last I looked this was only available with the PK2.

Some guys in the office here just picked up some of these, and seemed happy (so far).


Reply
Page 1 / 7
Share: