This project is fairly low priority for me, basically as backup for another project. Sometime back (like five or six years ago) I had a project using that part, but the programming was in PIC24 assembly language, and I don't remember if things were fully functional or not. I've translated the ENC24 setup from assembly language into C, although it's not tested. The 'run-time' aspects are fairly environment-specific. The processors that I'm using have relatively low amounts of RAM, so I'll be leaving the incoming data in the internal ENC memory, and copying them out as needed for protocol handling and for bridging to the nRF24L01 network. I suspect that this latter design won't be very useful to others, as I expect to use PIC24 interrupts to do the most immediate device control.
But I should be able to send you something in a couple of months (sooner if I end up trapped inside in -25C weather like we've been having recently).
